2008 BMW 130 vs. 2012 Chevrolet Silverado

To start off, 2012 Chevrolet Silverado is newer by 4 year(s). Which means there will be less support and parts availability for 2008 BMW 130. In addition, the cost of maintenance, including insurance, on 2008 BMW 130 would be higher. At 5,998 cc (8 cylinders), 2012 Chevrolet Silverado is equipped with a bigger engine. In terms of performance, 2012 Chevrolet Silverado (360 HP @ 5400 RPM) has 100 more horse power than 2008 BMW 130. (260 HP @ 6600 RPM) In normal driving conditions, 2012 Chevrolet Silverado should accelerate faster than 2008 BMW 130. With that said, vehicle weight also plays an important factor in acceleration. 2012 Chevrolet Silverado weights approximately 1178 kg more than 2008 BMW 130. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 Chevrolet Silverado (515 Nm @ 4200 RPM) has 200 more torque (in Nm) than 2008 BMW 130. (315 Nm @ 2500 RPM). This means 2012 Chevrolet Silverado will have an easier job in driving up hills or pulling heavy equipment than 2008 BMW 130. 2012 Chevrolet Silverado has automatic transmission and 2008 BMW 130 has manual transmission. 2008 BMW 130 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Chevrolet Silverado will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 BMW 130 2012 Chevrolet Silverado
Make BMW Chevrolet
Model 130 Silverado
Year Released 2008 2012
Body Type Hatchback Pickup
Engine Position Front Front
Engine Size 2994 cc 5998 cc
Engine Cylinders 6 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 2 valves
Horse Power 260 HP 360 HP
Engine RPM 6600 RPM 5400 RPM
Torque 315 Nm 515 Nm
Torque RPM 2500 RPM 4200 RPM
Engine Compression Ratio 10.7:1 10.0:1
Fuel Type Gasoline - Premium Gasoline
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 3 seats
Number of Doors 5 doors 2 doors
Vehicle Weight 1375 kg 2553 kg
Vehicle Length 4230 mm 5715 mm
Vehicle Width 1440 mm 8032 mm
Vehicle Height 1760 mm 1971 mm
Wheelbase Size 2670 mm 3396 mm
Fuel Tank Capacity 53 L 136 L