2008 BMW 130 vs. 2013 Mazda 3

To start off, 2013 Mazda 3 is newer by 5 year(s). Which means there will be less support and parts availability for 2008 BMW 130. In addition, the cost of maintenance, including insurance, on 2008 BMW 130 would be higher. At 2,996 cc (6 cylinders), 2008 BMW 130 is equipped with a bigger engine. In terms of performance, 2008 BMW 130 (268 HP @ 6800 RPM) has 113 more horse power than 2013 Mazda 3. (155 HP @ 6000 RPM). In normal driving conditions, 2008 BMW 130 should accelerate faster than 2013 Mazda 3. With that said, vehicle weight also plays an important factor in acceleration. 2008 BMW 130 weights approximately 72 kg more than 2013 Mazda 3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2008 BMW 130 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 BMW 130. However, in wet, icy, snow, or gravel driving conditions, 2013 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 BMW 130 (320 Nm @ 2500 RPM) has 120 more torque (in Nm) than 2013 Mazda 3. (200 Nm @ 4100 RPM). This means 2008 BMW 130 will have an easier job in driving up hills or pulling heavy equipment than 2013 Mazda 3. 2008 BMW 130 has automatic transmission and 2013 Mazda 3 has manual transmission. 2013 Mazda 3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 BMW 130 will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 BMW 130 2013 Mazda 3
Make BMW Mazda
Model 130 3
Year Released 2008 2013
Body Type Hatchback Sedan
Engine Position Front Front
Engine Size 2996 cc 1998 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 268 HP 155 HP
Engine RPM 6800 RPM 6000 RPM
Torque 320 Nm 200 Nm
Torque RPM 2500 RPM 4100 RPM
Engine Bore Size 85 mm 84 mm
Engine Stroke Size 88 mm 91 mm
Engine Compression Ratio 10.7:1 12.0:1
Fuel Type Gasoline - Premium Gasoline
Drive Type Rear Front
Transmission Type Automatic 6-speed manual
Number of Seats 5 seats 5 seats
Number of Doors 5 doors 4 doors
Vehicle Weight 1375 kg 1303 kg
Vehicle Length 4230 mm 4595 mm
Vehicle Width 1440 mm 1755 mm
Vehicle Height 1760 mm 1470 mm
Wheelbase Size 2670 mm 2640 mm
Fuel Tank Capacity 53 L 55 L