2008 BMW 316 vs. 1967 Ford GT 40

To start off, 2008 BMW 316 is newer by 41 year(s). Which means there will be less support and parts availability for 1967 Ford GT 40. In addition, the cost of maintenance, including insurance, on 1967 Ford GT 40 would be higher. At 4,195 cc (8 cylinders), 1967 Ford GT 40 is equipped with a bigger engine. In terms of performance, 1967 Ford GT 40 (350 HP @ 7200 RPM) has 237 more horse power than 2008 BMW 316. (113 HP @ 5500 RPM) In normal driving conditions, 1967 Ford GT 40 should accelerate faster than 2008 BMW 316. With that said, vehicle weight also plays an important factor in acceleration. 2008 BMW 316 weights approximately 465 kg more than 1967 Ford GT 40.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 BMW 316 (176 Nm) has 91 more torque (in Nm) than 1967 Ford GT 40. (85 Nm). This means 2008 BMW 316 will have an easier job in driving up hills or pulling heavy equipment than 1967 Ford GT 40.

Compare all specifications:

2008 BMW 316 1967 Ford GT 40
Make BMW Ford
Model 316 GT 40
Year Released 2008 1967
Body Type Hatchback Coupe
Engine Position Front Middle
Engine Size 1796 cc 4195 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line V
Horse Power 113 HP 350 HP
Engine RPM 5500 RPM 7200 RPM
Torque 176 Nm 85 Nm
Engine Bore Size 84 mm 95.6 mm
Engine Stroke Size 81 mm 72.9 mm
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 5 seats 2 seats
Number of Doors 3 doors 2 doors
Vehicle Weight 1375 kg 910 kg
Vehicle Length 4270 mm 4070 mm
Vehicle Width 1760 mm 1780 mm
Vehicle Height 1410 mm 1040 mm
Wheelbase Size 2730 mm 2420 mm
Fuel Tank Capacity 63 L 125 L