2008 BMW 320 vs. 1989 Mazda RX-7

To start off, 2008 BMW 320 is newer by 19 year(s). Which means there will be less support and parts availability for 1989 Mazda RX-7. In addition, the cost of maintenance, including insurance, on 1989 Mazda RX-7 would be higher. At 2,616 cc, 1989 Mazda RX-7 is equipped with a bigger engine. In terms of performance, 1989 Mazda RX-7 (197 HP @ 6500 RPM) has 36 more horse power than 2008 BMW 320. (161 HP @ 4000 RPM) In normal driving conditions, 1989 Mazda RX-7 should accelerate faster than 2008 BMW 320. With that said, vehicle weight also plays an important factor in acceleration. 2008 BMW 320 weights approximately 130 kg more than 1989 Mazda RX-7.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 BMW 320 (330 Nm @ 2000 RPM) has 59 more torque (in Nm) than 1989 Mazda RX-7. (271 Nm @ 3500 RPM). This means 2008 BMW 320 will have an easier job in driving up hills or pulling heavy equipment than 1989 Mazda RX-7.

Compare all specifications:

2008 BMW 320 1989 Mazda RX-7
Make BMW Mazda
Model 320 RX-7
Year Released 2008 1989
Body Type Station Wagon Convertible
Engine Position Front Front
Engine Size 1995 cc 2616 cc
Engine Type in-line dual-disk rotary
Horse Power 161 HP 197 HP
Engine RPM 4000 RPM 6500 RPM
Torque 330 Nm 271 Nm
Torque RPM 2000 RPM 3500 RPM
Fuel Type Diesel Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 5 seats 4 seats
Number of Doors 5 doors 2 doors
Vehicle Weight 1430 kg 1300 kg
Vehicle Length 4530 mm 4320 mm
Vehicle Width 1420 mm 1700 mm
Vehicle Height 1820 mm 1270 mm
Wheelbase Size 2770 mm 2430 mm
Fuel Tank Capacity 63 L 75 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]