2008 BMW 320 vs. 1990 Mercedes-Benz 300

To start off, 2008 BMW 320 is newer by 18 year(s). Which means there will be less support and parts availability for 1990 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1990 Mercedes-Benz 300 would be higher. At 2,962 cc (6 cylinders), 1990 Mercedes-Benz 300 is equipped with a bigger engine. In terms of performance, 1990 Mercedes-Benz 300 (188 HP @ 5700 RPM) has 20 more horse power than 2008 BMW 320. (168 HP @ 6100 RPM) In normal driving conditions, 1990 Mercedes-Benz 300 should accelerate faster than 2008 BMW 320. With that said, vehicle weight also plays an important factor in acceleration. 1990 Mercedes-Benz 300 weights approximately 50 kg more than 2008 BMW 320. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1990 Mercedes-Benz 300 (260 Nm @ 4800 RPM) has 50 more torque (in Nm) than 2008 BMW 320. (210 Nm @ 3500 RPM). This means 1990 Mercedes-Benz 300 will have an easier job in driving up hills or pulling heavy equipment than 2008 BMW 320. 1990 Mercedes-Benz 300 has automatic transmission and 2008 BMW 320 has manual transmission. 2008 BMW 320 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1990 Mercedes-Benz 300 will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 BMW 320 1990 Mercedes-Benz 300
Make BMW Mercedes-Benz
Model 320 300
Year Released 2008 1990
Engine Position Front Front
Engine Size 2171 cc 2962 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 168 HP 188 HP
Engine RPM 6100 RPM 5700 RPM
Torque 210 Nm 260 Nm
Torque RPM 3500 RPM 4800 RPM
Engine Bore Size 80 mm 88.5 mm
Engine Stroke Size 72 mm 80.3 mm
Engine Compression Ratio 10.8:1 10.0:1
Top Speed 226 km/hour 211 km/hour
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1470 kg 1520 kg
Vehicle Length 4490 mm 5030 mm
Vehicle Width 1760 mm 1830 mm
Vehicle Height 1380 mm 1440 mm
Wheelbase Size 2730 mm 2940 mm