2008 BMW 320 vs. 2008 Mazda Etude

To start off, both 2008 BMW 320 and 2008 Mazda Etude were released in the same year (2008). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 1,995 cc (4 cylinders), 2008 BMW 320 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 BMW 320 weights approximately 445 kg more than 2008 Mazda Etude.

Because 2008 BMW 320 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 BMW 320. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda Etude, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 BMW 320 (330 Nm @ 2000 RPM) has 188 more torque (in Nm) than 2008 Mazda Etude. (142 Nm @ 4000 RPM). This means 2008 BMW 320 will have an easier job in driving up hills or pulling heavy equipment than 2008 Mazda Etude.

Compare all specifications:

2008 BMW 320 2008 Mazda Etude
Make BMW Mazda
Model 320 Etude
Year Released 2008 2008
Body Type Coupe Sedan
Engine Position Front Front
Engine Size 1995 cc 1595 cc
Valves per Cylinder 4 valves 4 valves
Horse Power 149 HP 0 HP
Torque 330 Nm 142 Nm
Torque RPM 2000 RPM 4000 RPM
Engine Bore Size 84 mm 78 mm
Engine Stroke Size 90 mm 83.6 mm
Engine Compression Ratio 17.0:1 9.4:1
Fuel Type Diesel Gasoline
Top Speed 221 km/hour 186 km/hour
Acceleration 0-100mph 8.8 seconds 11.1 seconds
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1490 kg 1045 kg
Vehicle Length 4490 mm 4500 mm
Vehicle Height 1380 mm 1760 mm
Wheelbase Size 2730 mm 2620 mm
Fuel Consumption Overall 5.8 L/100km 7 L/100km
Fuel Tank Capacity 63 L 55 L