2008 BMW 325 vs. 1969 Holden Belmont

To start off, 2008 BMW 325 is newer by 39 year(s). Which means there will be less support and parts availability for 1969 Holden Belmont. In addition, the cost of maintenance, including insurance, on 1969 Holden Belmont would be higher. At 3,034 cc (6 cylinders), 1969 Holden Belmont is equipped with a bigger engine. In terms of performance, 2008 BMW 325 (189 HP @ 6000 RPM) has 60 more horse power than 1969 Holden Belmont. (129 HP @ 4400 RPM). In normal driving conditions, 2008 BMW 325 should accelerate faster than 1969 Holden Belmont. With that said, vehicle weight also plays an important factor in acceleration. 2008 BMW 325 weights approximately 365 kg more than 1969 Holden Belmont. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1969 Holden Belmont (247 Nm @ 2000 RPM) has 2 more torque (in Nm) than 2008 BMW 325. (245 Nm @ 3500 RPM). This means 1969 Holden Belmont will have an easier job in driving up hills or pulling heavy equipment than 2008 BMW 325.

Compare all specifications:

2008 BMW 325 1969 Holden Belmont
Make BMW Holden
Model 325 Belmont
Year Released 2008 1969
Engine Position Front Front
Engine Size 2493 cc 3034 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 189 HP 129 HP
Engine RPM 6000 RPM 4400 RPM
Torque 245 Nm 247 Nm
Torque RPM 3500 RPM 2000 RPM
Fuel Type Gasoline - Premium Gasoline
Drive Type Rear Rear
Vehicle Weight 1640 kg 1275 kg
Vehicle Length 4490 mm 4700 mm
Vehicle Width 1760 mm 1830 mm
Vehicle Height 1380 mm 1420 mm
Wheelbase Size 2730 mm 2830 mm