2008 BMW 325 vs. 1997 Ford F-150

To start off, 2008 BMW 325 is newer by 11 year(s). Which means there will be less support and parts availability for 1997 Ford F-150. In addition, the cost of maintenance, including insurance, on 1997 Ford F-150 would be higher. At 4,605 cc (8 cylinders), 1997 Ford F-150 is equipped with a bigger engine. In terms of performance, 1997 Ford F-150 (217 HP @ 4500 RPM) has 28 more horse power than 2008 BMW 325. (189 HP @ 6000 RPM) In normal driving conditions, 1997 Ford F-150 should accelerate faster than 2008 BMW 325. With that said, vehicle weight also plays an important factor in acceleration. 1997 Ford F-150 weights approximately 530 kg more than 2008 BMW 325. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are four wheel drive (4WD) - it offers better handling, traction, and control in all driving conditions compared with front wheel drive or rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1997 Ford F-150 (393 Nm @ 3250 RPM) has 148 more torque (in Nm) than 2008 BMW 325. (245 Nm @ 3500 RPM). This means 1997 Ford F-150 will have an easier job in driving up hills or pulling heavy equipment than 2008 BMW 325.

Compare all specifications:

2008 BMW 325 1997 Ford F-150
Make BMW Ford
Model 325 F-150
Year Released 2008 1997
Body Type Sedan Pickup
Engine Position Front Front
Engine Size 2494 cc 4605 cc
Engine Cylinders 6 cylinders 8 cylinders
Engine Type in-line in-line
Horse Power 189 HP 217 HP
Engine RPM 6000 RPM 4500 RPM
Torque 245 Nm 393 Nm
Torque RPM 3500 RPM 3250 RPM
Fuel Type Gasoline - Premium Gasoline
Drive Type 4WD 4WD
Transmission Type Manual Manual
Number of Seats 5 seats 2 seats
Vehicle Weight 1575 kg 2105 kg
Vehicle Length 4480 mm 5230 mm
Vehicle Width 1750 mm 2000 mm
Vehicle Height 1440 mm 1850 mm
Wheelbase Size 2730 mm 3050 mm