2008 BMW 325 vs. 2000 Caterham 7

To start off, 2008 BMW 325 is newer by 8 year(s). Which means there will be less support and parts availability for 2000 Caterham 7. In addition, the cost of maintenance, including insurance, on 2000 Caterham 7 would be higher. At 2,493 cc (6 cylinders), 2008 BMW 325 is equipped with a bigger engine. In terms of performance, 2000 Caterham 7 (230 HP @ 8600 RPM) has 41 more horse power than 2008 BMW 325. (189 HP @ 6000 RPM) In normal driving conditions, 2000 Caterham 7 should accelerate faster than 2008 BMW 325. With that said, vehicle weight also plays an important factor in acceleration. 2008 BMW 325 weights approximately 1035 kg more than 2000 Caterham 7.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 BMW 325 (245 Nm @ 3500 RPM) has 35 more torque (in Nm) than 2000 Caterham 7. (210 Nm @ 7200 RPM). This means 2008 BMW 325 will have an easier job in driving up hills or pulling heavy equipment than 2000 Caterham 7.

Compare all specifications:

2008 BMW 325 2000 Caterham 7
Make BMW Caterham
Model 325 7
Year Released 2008 2000
Engine Position Front Front
Engine Size 2493 cc 1795 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 189 HP 230 HP
Engine RPM 6000 RPM 8600 RPM
Torque 245 Nm 210 Nm
Torque RPM 3500 RPM 7200 RPM
Engine Bore Size 84 mm 80 mm
Engine Stroke Size 75 mm 89.3 mm
Engine Compression Ratio 11.0:1 11.5:1
Top Speed 240 km/hour 235 km/hour
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 5 seats 2 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1495 kg 460 kg
Vehicle Length 4490 mm 3110 mm
Vehicle Width 1760 mm 1580 mm
Vehicle Height 1380 mm 810 mm
Wheelbase Size 2730 mm 2230 mm