2008 BMW 325 vs. 2009 Mazda BT-50

To start off, 2009 Mazda BT-50 is newer by 1 year(s). Which means there will be less support and parts availability for 2008 BMW 325. In addition, the cost of maintenance, including insurance, on 2008 BMW 325 would be higher. At 2,953 cc (4 cylinders), 2009 Mazda BT-50 is equipped with a bigger engine.

Because 2009 Mazda BT-50 is four wheel drive (4WD), it will have significant more traction and grip than 2008 BMW 325. In wet, icy, snow, or gravel driving conditions, 2009 Mazda BT-50 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Mazda BT-50 (380 Nm @ 180 RPM) has 130 more torque (in Nm) than 2008 BMW 325. (250 Nm @ 2750 RPM). This means 2009 Mazda BT-50 will have an easier job in driving up hills or pulling heavy equipment than 2008 BMW 325. 2008 BMW 325 has automatic transmission and 2009 Mazda BT-50 has manual transmission. 2009 Mazda BT-50 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 BMW 325 will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 BMW 325 2009 Mazda BT-50
Make BMW Mazda
Model 325 BT-50
Year Released 2008 2009
Body Type Sedan Pickup
Engine Position Front Front
Engine Size 2497 cc 2953 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 0 HP 154 HP
Torque 250 Nm 380 Nm
Torque RPM 2750 RPM 180 RPM
Engine Bore Size 78.9 mm 96.1 mm
Engine Stroke Size 82 mm 102 mm
Engine Compression Ratio 11.0:1 18.0:1
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Transmission Type Automatic Manual
Number of Seats 5 seats 2 seats
Number of Doors 4 doors 2 doors
Vehicle Height 1820 mm 1810 mm
Wheelbase Size 2770 mm 3010 mm