2008 BMW 325 vs. 2010 Peugeot 5008

To start off, 2010 Peugeot 5008 is newer by 2 year(s). Which means there will be less support and parts availability for 2008 BMW 325. In addition, the cost of maintenance, including insurance, on 2008 BMW 325 would be higher. At 2,497 cc (6 cylinders), 2008 BMW 325 is equipped with a bigger engine. In terms of performance, 2008 BMW 325 (215 HP @ 6500 RPM) has 54 more horse power than 2010 Peugeot 5008. (161 HP @ 3750 RPM). In normal driving conditions, 2008 BMW 325 should accelerate faster than 2010 Peugeot 5008.

Because 2008 BMW 325 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 BMW 325. However, in wet, icy, snow, or gravel driving conditions, 2010 Peugeot 5008, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Peugeot 5008 (340 Nm @ 2000 RPM) has 90 more torque (in Nm) than 2008 BMW 325. (250 Nm @ 2750 RPM). This means 2010 Peugeot 5008 will have an easier job in driving up hills or pulling heavy equipment than 2008 BMW 325.

Compare all specifications:

2008 BMW 325 2010 Peugeot 5008
Make BMW Peugeot
Model 325 5008
Year Released 2008 2010
Body Type Station Wagon Minivan
Engine Position Front Front
Engine Size 2497 cc 1997 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 215 HP 161 HP
Engine RPM 6500 RPM 3750 RPM
Torque 250 Nm 340 Nm
Torque RPM 2750 RPM 2000 RPM
Fuel Type Gasoline Diesel
Top Speed 240 km/hour 190 km/hour
Acceleration 0-100mph 7.9 seconds 10.5 seconds
Drive Type Rear Front
Transmission Type Automatic Automatic
Number of Seats 5 seats 7 seats
Number of Doors 5 doors 5 doors
Vehicle Length 4530 mm 4530 mm
Vehicle Width 1420 mm 1835 mm
Vehicle Height 1820 mm 1640 mm
Wheelbase Size 2770 mm 2735 mm