2008 BMW 330 vs. 1992 Toyota Sera

To start off, 2008 BMW 330 is newer by 16 year(s). Which means there will be less support and parts availability for 1992 Toyota Sera. In addition, the cost of maintenance, including insurance, on 1992 Toyota Sera would be higher. At 2,996 cc (6 cylinders), 2008 BMW 330 is equipped with a bigger engine. In terms of performance, 2008 BMW 330 (260 HP @ 6600 RPM) has 156 more horse power than 1992 Toyota Sera. (104 HP @ 6000 RPM). In normal driving conditions, 2008 BMW 330 should accelerate faster than 1992 Toyota Sera. With that said, vehicle weight also plays an important factor in acceleration. 2008 BMW 330 weights approximately 640 kg more than 1992 Toyota Sera. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2008 BMW 330 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 BMW 330. However, in wet, icy, snow, or gravel driving conditions, 1992 Toyota Sera, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 BMW 330 (300 Nm) has 168 more torque (in Nm) than 1992 Toyota Sera. (132 Nm). This means 2008 BMW 330 will have an easier job in driving up hills or pulling heavy equipment than 1992 Toyota Sera. 2008 BMW 330 has automatic transmission and 1992 Toyota Sera has manual transmission. 1992 Toyota Sera will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 BMW 330 will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 BMW 330 1992 Toyota Sera
Make BMW Toyota
Model 330 Sera
Year Released 2008 1992
Engine Position Front Front
Engine Size 2996 cc 1497 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 260 HP 104 HP
Engine RPM 6600 RPM 6000 RPM
Torque 300 Nm 132 Nm
Engine Bore Size 85 mm 73.9 mm
Engine Stroke Size 88 mm 87.1 mm
Engine Compression Ratio 10.7:1 9.8:1
Top Speed 250 km/hour 195 km/hour
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Seats 5 seats 4 seats
Vehicle Weight 1540 kg 900 kg
Vehicle Length 4530 mm 3870 mm
Vehicle Width 1760 mm 1660 mm
Vehicle Height 1820 mm 1270 mm
Wheelbase Size 2770 mm 2410 mm