2008 BMW 330 vs. 1996 Mazda RX-01

To start off, 2008 BMW 330 is newer by 12 year(s). Which means there will be less support and parts availability for 1996 Mazda RX-01. In addition, the cost of maintenance, including insurance, on 1996 Mazda RX-01 would be higher. At 2,993 cc (6 cylinders), 2008 BMW 330 is equipped with a bigger engine. In terms of performance, 1996 Mazda RX-01 (217 HP @ 8500 RPM) has 15 more horse power than 2008 BMW 330. (202 HP @ 4000 RPM) In normal driving conditions, 1996 Mazda RX-01 should accelerate faster than 2008 BMW 330. With that said, vehicle weight also plays an important factor in acceleration. 2008 BMW 330 weights approximately 680 kg more than 1996 Mazda RX-01.

Because 2008 BMW 330 is four wheel drive (4WD), it will have significant more traction and grip than 1996 Mazda RX-01. In wet, icy, snow, or gravel driving conditions, 2008 BMW 330 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 BMW 330 (410 Nm @ 1500 RPM) has 190 more torque (in Nm) than 1996 Mazda RX-01. (220 Nm @ 6000 RPM). This means 2008 BMW 330 will have an easier job in driving up hills or pulling heavy equipment than 1996 Mazda RX-01.

Compare all specifications:

2008 BMW 330 1996 Mazda RX-01
Make BMW Mazda
Model 330 RX-01
Year Released 2008 1996
Engine Position Front Front
Engine Size 2993 cc 2615 cc
Engine Type in-line dual-disk rotary
Horse Power 202 HP 217 HP
Engine RPM 4000 RPM 8500 RPM
Torque 410 Nm 220 Nm
Torque RPM 1500 RPM 6000 RPM
Engine Compression Ratio 17.0:1 9.0:1
Fuel Type Diesel Gasoline
Drive Type 4WD Front
Vehicle Weight 1780 kg 1100 kg
Vehicle Length 4480 mm 4060 mm
Vehicle Width 1750 mm 1740 mm
Vehicle Height 1440 mm 1250 mm
Wheelbase Size 2730 mm 2350 mm
Fuel Tank Capacity 63 L 55 L