2008 BMW 523 vs. 1992 Buick Park Avenue

To start off, 2008 BMW 523 is newer by 16 year(s). Which means there will be less support and parts availability for 1992 Buick Park Avenue. In addition, the cost of maintenance, including insurance, on 1992 Buick Park Avenue would be higher. At 3,791 cc (6 cylinders), 1992 Buick Park Avenue is equipped with a bigger engine. In terms of performance, 1992 Buick Park Avenue (205 HP @ 4400 RPM) has 30 more horse power than 2008 BMW 523. (175 HP @ 5800 RPM) In normal driving conditions, 1992 Buick Park Avenue should accelerate faster than 2008 BMW 523. With that said, vehicle weight also plays an important factor in acceleration. 1992 Buick Park Avenue weights approximately 160 kg more than 2008 BMW 523. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2008 BMW 523 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 BMW 523. However, in wet, icy, snow, or gravel driving conditions, 1992 Buick Park Avenue, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 Buick Park Avenue (260 Nm @ 2600 RPM) has 30 more torque (in Nm) than 2008 BMW 523. (230 Nm @ 3500 RPM). This means 1992 Buick Park Avenue will have an easier job in driving up hills or pulling heavy equipment than 2008 BMW 523. 1992 Buick Park Avenue has automatic transmission and 2008 BMW 523 has manual transmission. 2008 BMW 523 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1992 Buick Park Avenue will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 BMW 523 1992 Buick Park Avenue
Make BMW Buick
Model 523 Park Avenue
Year Released 2008 1992
Body Type Sedan Sedan
Engine Position Front Front
Engine Size 2497 cc 3791 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 4 valves 2 valves
Horse Power 175 HP 205 HP
Engine RPM 5800 RPM 4400 RPM
Torque 230 Nm 260 Nm
Torque RPM 3500 RPM 2600 RPM
Engine Bore Size 78.8 mm 96.5 mm
Engine Stroke Size 82 mm 86.4 mm
Engine Compression Ratio 11.0:1 8.5:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1490 kg 1650 kg
Vehicle Length 4850 mm 5220 mm
Vehicle Width 1850 mm 1880 mm
Vehicle Height 1470 mm 1410 mm
Wheelbase Size 2890 mm 2820 mm


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]