2008 BMW 525 vs. 2008 Toyota Sienna

To start off, both 2008 BMW 525 and 2008 Toyota Sienna were released in the same year (2008). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 3,456 cc (6 cylinders), 2008 Toyota Sienna is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 BMW 525 weights approximately 328 kg more than 2008 Toyota Sienna.

Because 2008 BMW 525 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 BMW 525. However, in wet, icy, snow, or gravel driving conditions, 2008 Toyota Sienna, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Toyota Sienna (332 Nm @ 4700 RPM) has 87 more torque (in Nm) than 2008 BMW 525. (245 Nm @ 3500 RPM). This means 2008 Toyota Sienna will have an easier job in driving up hills or pulling heavy equipment than 2008 BMW 525.

Compare all specifications:

2008 BMW 525 2008 Toyota Sienna
Make BMW Toyota
Model 525 Sienna
Year Released 2008 2008
Body Type Station Wagon Minivan
Engine Position Front Front
Engine Size 2494 cc 3456 cc
Valves per Cylinder 4 valves 4 valves
Horse Power 0 HP 266 HP
Torque 245 Nm 332 Nm
Torque RPM 3500 RPM 4700 RPM
Engine Compression Ratio 10.5:1 10.8:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Automatic Automatic
Number of Seats 5 seats 7 seats
Number of Doors 5 doors 4 doors
Vehicle Weight 1680 kg 1352 kg
Vehicle Length 4870 mm 5110 mm
Vehicle Width 1850 mm 1970 mm
Vehicle Height 1500 mm 1760 mm
Wheelbase Size 2840 mm 3040 mm
Fuel Consumption Overall 9.8 L/100km 12.4 L/100km
Fuel Tank Capacity 70 L 76 L