2008 BMW 550 vs. 2008 Chrysler Aspen

To start off, both 2008 BMW 550 and 2008 Chrysler Aspen were released in the same year (2008). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 4,799 cc, 2008 BMW 550 is equipped with a bigger engine. In terms of performance, 2008 BMW 550 (360 HP @ 6300 RPM) has 57 more horse power than 2008 Chrysler Aspen. (303 HP @ 5650 RPM). In normal driving conditions, 2008 BMW 550 should accelerate faster than 2008 Chrysler Aspen. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Aspen weights approximately 299 kg more than 2008 BMW 550.

Because 2008 Chrysler Aspen is four wheel drive (4WD), it will have significant more traction and grip than 2008 BMW 550. In wet, icy, snow, or gravel driving conditions, 2008 Chrysler Aspen will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 BMW 550 (490 Nm @ 3400 RPM) has 43 more torque (in Nm) than 2008 Chrysler Aspen. (447 Nm @ 3950 RPM). This means 2008 BMW 550 will have an easier job in driving up hills or pulling heavy equipment than 2008 Chrysler Aspen.

Compare all specifications:

2008 BMW 550 2008 Chrysler Aspen
Make BMW Chrysler
Model 550 Aspen
Year Released 2008 2008
Engine Position Front Front
Engine Size 4799 cc 4701 cc
Valves per Cylinder 4 valves 2 valves
Horse Power 360 HP 303 HP
Engine RPM 6300 RPM 5650 RPM
Torque 490 Nm 447 Nm
Torque RPM 3400 RPM 3950 RPM
Engine Compression Ratio 10.5:1 9.8:1
Drive Type Rear 4WD
Transmission Type Automatic Automatic
Number of Seats 5 seats 8 seats
Number of Doors 5 doors 5 doors
Vehicle Weight 1660 kg 1959 kg
Vehicle Length 4870 mm 5140 mm
Vehicle Height 1470 mm 1880 mm
Wheelbase Size 2890 mm 3030 mm
Fuel Consumption Overall 11.1 L/100km 10.2 L/100km
Fuel Tank Capacity 70 L 102 L