2008 BMW 630 vs. 2001 Ford TE-50

To start off, 2008 BMW 630 is newer by 7 year(s). Which means there will be less support and parts availability for 2001 Ford TE-50. In addition, the cost of maintenance, including insurance, on 2001 Ford TE-50 would be higher. At 4,940 cc (8 cylinders), 2001 Ford TE-50 is equipped with a bigger engine. In terms of performance, 2001 Ford TE-50 (295 HP @ 5250 RPM) has 40 more horse power than 2008 BMW 630. (255 HP @ 6600 RPM) In normal driving conditions, 2001 Ford TE-50 should accelerate faster than 2008 BMW 630. With that said, vehicle weight also plays an important factor in acceleration. 2008 BMW 630 weights approximately 94 kg more than 2001 Ford TE-50.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2001 Ford TE-50 (435 Nm @ 4000 RPM) has 135 more torque (in Nm) than 2008 BMW 630. (300 Nm @ 2500 RPM). This means 2001 Ford TE-50 will have an easier job in driving up hills or pulling heavy equipment than 2008 BMW 630.

Compare all specifications:

2008 BMW 630 2001 Ford TE-50
Make BMW Ford
Model 630 TE-50
Year Released 2008 2001
Engine Position Front Front
Engine Size 2996 cc 4940 cc
Engine Cylinders 6 cylinders 8 cylinders
Engine Type in-line V
Horse Power 255 HP 295 HP
Engine RPM 6600 RPM 5250 RPM
Torque 300 Nm 435 Nm
Torque RPM 2500 RPM 4000 RPM
Engine Bore Size 85 mm 101.6 mm
Engine Stroke Size 88 mm 76.2 mm
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1760 kg 1666 kg
Vehicle Length 4830 mm 4910 mm
Vehicle Width 1860 mm 1880 mm
Vehicle Height 1380 mm 1420 mm
Wheelbase Size 2790 mm 2800 mm
Fuel Tank Capacity 70 L 68 L