2008 BMW 645 vs. 2008 Honda Civic

To start off, both 2008 BMW 645 and 2008 Honda Civic were released in the same year (2008). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 4,398 cc (8 cylinders), 2008 BMW 645 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 BMW 645 weights approximately 535 kg more than 2008 Honda Civic.

Because 2008 BMW 645 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 BMW 645. However, in wet, icy, snow, or gravel driving conditions, 2008 Honda Civic, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 BMW 645 (450 Nm @ 3600 RPM) has 276 more torque (in Nm) than 2008 Honda Civic. (174 Nm @ 4200 RPM). This means 2008 BMW 645 will have an easier job in driving up hills or pulling heavy equipment than 2008 Honda Civic.

Compare all specifications:

2008 BMW 645 2008 Honda Civic
Make BMW Honda
Model 645 Civic
Year Released 2008 2008
Body Type Convertible Sedan
Engine Position Front Front
Engine Size 4398 cc 1799 cc
Valves per Cylinder 4 valves 4 valves
Horse Power 328 HP 0 HP
Torque 450 Nm 174 Nm
Torque RPM 3600 RPM 4200 RPM
Engine Bore Size 92 mm 81 mm
Engine Stroke Size 82.7 mm 87.3 mm
Engine Compression Ratio 10.0:1 10.5:1
Fuel Type Gasoline - Premium Gasoline
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1815 kg 1280 kg
Vehicle Length 4830 mm 4940 mm
Vehicle Height 1380 mm 1480 mm
Wheelbase Size 2790 mm 2710 mm
Fuel Consumption Overall 12.8 L/100km 9 L/100km
Fuel Tank Capacity 70 L 50 L