2008 BMW 645 vs. 2010 Hyundai H1
To start off, 2010 Hyundai H1 is newer by 2 year(s). Which means there will be less support and parts availability for 2008 BMW 645. In addition, the cost of maintenance, including insurance, on 2008 BMW 645 would be higher. At 4,398 cc (8 cylinders), 2008 BMW 645 is equipped with a bigger engine. In terms of performance, 2008 BMW 645 (328 HP @ 6100 RPM) has 159 more horse power than 2010 Hyundai H1. (169 HP @ 6000 RPM). In normal driving conditions, 2008 BMW 645 should accelerate faster than 2010 Hyundai H1.
Let's talk about torque, 2008 BMW 645 (450 Nm @ 3600 RPM) has 226 more torque (in Nm) than 2010 Hyundai H1. (224 Nm @ 4200 RPM). This means 2008 BMW 645 will have an easier job in driving up hills or pulling heavy equipment than 2010 Hyundai H1.
Compare all specifications:
| 2008 BMW 645 | 2010 Hyundai H1 | |
| Make | BMW | Hyundai |
| Model | 645 | H1 |
| Year Released | 2008 | 2010 |
| Body Type | Coupe | Van |
| Engine Position | Front | Front |
| Engine Size | 4398 cc | 2359 cc |
| Engine Cylinders | 8 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Valves per Cylinder | 4 valves | 4 valves |
| Horse Power | 328 HP | 169 HP |
| Engine RPM | 6100 RPM | 6000 RPM |
| Torque | 450 Nm | 224 Nm |
| Torque RPM | 3600 RPM | 4200 RPM |
| Engine Bore Size | 92.1 mm | 88 mm |
| Engine Stroke Size | 82.7 mm | 97 mm |
| Engine Compression Ratio | 10.0:1 | 10.5:1 |
| Fuel Type | Gasoline - Premium | Gasoline |
| Acceleration 0-100mph | 5.6 seconds | 16.5 seconds |
| Transmission Type | Manual | Manual |
| Number of Seats | 4 seats | 9 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Length | 4830 mm | 5130 mm |
| Vehicle Width | 1860 mm | 1930 mm |
| Vehicle Height | 1380 mm | 1940 mm |
| Wheelbase Size | 2790 mm | 3210 mm |
| Fuel Consumption Overall | 11.8 L/100km | 10.2 L/100km |
| Fuel Tank Capacity | 70 L | 75 L |
