2008 BMW M3 vs. 2003 SsangYong Chairman H

To start off, 2008 BMW M3 is newer by 5 year(s). Which means there will be less support and parts availability for 2003 SsangYong Chairman H. In addition, the cost of maintenance, including insurance, on 2003 SsangYong Chairman H would be higher. At 3,246 cc (6 cylinders), 2008 BMW M3 is equipped with a bigger engine. In terms of performance, 2008 BMW M3 (338 HP @ 7900 RPM) has 190 more horse power than 2003 SsangYong Chairman H. (148 HP @ 5600 RPM). In normal driving conditions, 2008 BMW M3 should accelerate faster than 2003 SsangYong Chairman H. With that said, vehicle weight also plays an important factor in acceleration. 2008 BMW M3 weights approximately 80 kg more than 2003 SsangYong Chairman H. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 BMW M3 (365 Nm @ 4900 RPM) has 152 more torque (in Nm) than 2003 SsangYong Chairman H. (213 Nm @ 3600 RPM). This means 2008 BMW M3 will have an easier job in driving up hills or pulling heavy equipment than 2003 SsangYong Chairman H. 2003 SsangYong Chairman H has automatic transmission and 2008 BMW M3 has manual transmission. 2008 BMW M3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 SsangYong Chairman H will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 BMW M3 2003 SsangYong Chairman H
Make BMW SsangYong
Model M3 Chairman H
Year Released 2008 2003
Body Type Convertible Sedan
Engine Position Front Front
Engine Size 3246 cc 2294 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 338 HP 148 HP
Engine RPM 7900 RPM 5600 RPM
Torque 365 Nm 213 Nm
Torque RPM 4900 RPM 3600 RPM
Engine Bore Size 87.1 mm 90.9 mm
Engine Stroke Size 91 mm 88.4 mm
Engine Compression Ratio 11.5:1 10.4:1
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1655 kg 1575 kg
Vehicle Length 4500 mm 5060 mm
Vehicle Width 1790 mm 1830 mm
Vehicle Height 1380 mm 1470 mm
Wheelbase Size 2740 mm 2910 mm