2008 BMW X3 vs. 1948 Jaguar Mark IV

To start off, 2008 BMW X3 is newer by 60 year(s). Which means there will be less support and parts availability for 1948 Jaguar Mark IV. In addition, the cost of maintenance, including insurance, on 1948 Jaguar Mark IV would be higher. At 3,485 cc (6 cylinders), 1948 Jaguar Mark IV is equipped with a bigger engine. In terms of performance, 2008 BMW X3 (260 HP @ 6600 RPM) has 137 more horse power than 1948 Jaguar Mark IV. (123 HP @ 4250 RPM). In normal driving conditions, 2008 BMW X3 should accelerate faster than 1948 Jaguar Mark IV. With that said, vehicle weight also plays an important factor in acceleration. 1948 Jaguar Mark IV weights approximately 275 kg more than 2008 BMW X3.

Because 2008 BMW X3 is four wheel drive (4WD), it will have significant more traction and grip than 1948 Jaguar Mark IV. In wet, icy, snow, or gravel driving conditions, 2008 BMW X3 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 BMW X3 (305 Nm @ 2750 RPM) has 55 more torque (in Nm) than 1948 Jaguar Mark IV. (250 Nm @ 2000 RPM). This means 2008 BMW X3 will have an easier job in driving up hills or pulling heavy equipment than 1948 Jaguar Mark IV.

Compare all specifications:

2008 BMW X3 1948 Jaguar Mark IV
Make BMW Jaguar
Model X3 Mark IV
Year Released 2008 1948
Engine Position Front Front
Engine Size 2996 cc 3485 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 260 HP 123 HP
Engine RPM 6600 RPM 4250 RPM
Torque 305 Nm 250 Nm
Torque RPM 2750 RPM 2000 RPM
Fuel Type Gasoline Gasoline
Drive Type 4WD Rear
Transmission Type Manual Manual
Vehicle Weight 1515 kg 1790 kg
Vehicle Length 4580 mm 4730 mm
Vehicle Width 1860 mm 1680 mm
Wheelbase Size 2800 mm 3060 mm