2008 BMW X5 vs. 1983 Pininfarina Coupe

To start off, 2008 BMW X5 is newer by 25 year(s). Which means there will be less support and parts availability for 1983 Pininfarina Coupe. In addition, the cost of maintenance, including insurance, on 1983 Pininfarina Coupe would be higher. At 4,398 cc, 2008 BMW X5 is equipped with a bigger engine. In terms of performance, 2008 BMW X5 (328 HP) has 203 more horse power than 1983 Pininfarina Coupe. (125 HP). In normal driving conditions, 2008 BMW X5 should accelerate faster than 1983 Pininfarina Coupe.

Because 2008 BMW X5 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 BMW X5. However, in wet, icy, snow, or gravel driving conditions, 1983 Pininfarina Coupe, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 BMW X5 (440 Nm) has 264 more torque (in Nm) than 1983 Pininfarina Coupe. (176 Nm). This means 2008 BMW X5 will have an easier job in driving up hills or pulling heavy equipment than 1983 Pininfarina Coupe. 2008 BMW X5 has automatic transmission and 1983 Pininfarina Coupe has manual transmission. 1983 Pininfarina Coupe will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 BMW X5 will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 BMW X5 1983 Pininfarina Coupe
Make BMW Pininfarina
Model X5 Coupe
Year Released 2008 1983
Body Type SUV Coupe
Engine Position Front Front
Engine Size 4398 cc 1995 cc
Valves per Cylinder 4 valves 2 valves
Horse Power 328 HP 125 HP
Torque 440 Nm 176 Nm
Engine Compression Ratio 10.0:1 9.5:1
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Seats 5 seats 4 seats
Vehicle Length 4870 mm 4070 mm
Vehicle Height 1480 mm 1340 mm
Wheelbase Size 2830 mm 2450 mm