2008 BMW Z4 vs. 1958 Talbot 2500

To start off, 2008 BMW Z4 is newer by 50 year(s). Which means there will be less support and parts availability for 1958 Talbot 2500. In addition, the cost of maintenance, including insurance, on 1958 Talbot 2500 would be higher. At 2,996 cc (6 cylinders), 2008 BMW Z4 is equipped with a bigger engine. In terms of performance, 2008 BMW Z4 (261 HP @ 6600 RPM) has 142 more horse power than 1958 Talbot 2500. (119 HP @ 5000 RPM). In normal driving conditions, 2008 BMW Z4 should accelerate faster than 1958 Talbot 2500. With that said, vehicle weight also plays an important factor in acceleration. 2008 BMW Z4 weights approximately 395 kg more than 1958 Talbot 2500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 BMW Z4 (316 Nm @ 2750 RPM) has 120 more torque (in Nm) than 1958 Talbot 2500. (196 Nm @ 2200 RPM). This means 2008 BMW Z4 will have an easier job in driving up hills or pulling heavy equipment than 1958 Talbot 2500.

Compare all specifications:

2008 BMW Z4 1958 Talbot 2500
Make BMW Talbot
Model Z4 2500
Year Released 2008 1958
Engine Size 2996 cc 2491 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 261 HP 119 HP
Engine RPM 6600 RPM 5000 RPM
Torque 316 Nm 196 Nm
Torque RPM 2750 RPM 2200 RPM
Fuel Type Gasoline - Premium Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 1395 kg 1000 kg
Vehicle Length 4100 mm 4210 mm
Vehicle Width 1790 mm 1650 mm
Vehicle Height 1270 mm 1340 mm
Wheelbase Size 2500 mm 2510 mm