2008 BMW Z4 vs. 1996 Italdesign Formula 4
To start off, 2008 BMW Z4 is newer by 12 year(s). Which means there will be less support and parts availability for 1996 Italdesign Formula 4. In addition, the cost of maintenance, including insurance, on 1996 Italdesign Formula 4 would be higher. At 2,994 cc (6 cylinders), 2008 BMW Z4 is equipped with a bigger engine. In terms of performance, 2008 BMW Z4 (215 HP) has 68 more horse power than 1996 Italdesign Formula 4. (147 HP). In normal driving conditions, 2008 BMW Z4 should accelerate faster than 1996 Italdesign Formula 4.
Because 2008 BMW Z4 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 BMW Z4. However, in wet, icy, snow, or gravel driving conditions, 1996 Italdesign Formula 4, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 BMW Z4 (251 Nm) has 64 more torque (in Nm) than 1996 Italdesign Formula 4. (187 Nm). This means 2008 BMW Z4 will have an easier job in driving up hills or pulling heavy equipment than 1996 Italdesign Formula 4.
Compare all specifications:
| 2008 BMW Z4 | 1996 Italdesign Formula 4 | |
| Make | BMW | Italdesign |
| Model | Z4 | Formula 4 |
| Year Released | 2008 | 1996 |
| Engine Position | Front | Front |
| Engine Size | 2994 cc | 1998 cc |
| Valves per Cylinder | 4 valves | 4 valves |
| Horse Power | 215 HP | 147 HP |
| Torque | 251 Nm | 187 Nm |
| Engine Compression Ratio | 10.7:1 | 10.0:1 |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Manual |
| Number of Seats | 2 seats | 4 seats |
| Vehicle Length | 4100 mm | 4160 mm |
| Vehicle Width | 1790 mm | 1830 mm |
| Vehicle Height | 1300 mm | 1200 mm |
| Wheelbase Size | 2500 mm | 2550 mm |
