2008 Chevrolet Blazer vs. 1965 Pontiac Catalina
To start off, 2008 Chevrolet Blazer is newer by 43 year(s). Which means there will be less support and parts availability for 1965 Pontiac Catalina. In addition, the cost of maintenance, including insurance, on 1965 Pontiac Catalina would be higher. At 6,891 cc (8 cylinders), 1965 Pontiac Catalina is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1965 Pontiac Catalina weights approximately 9 kg more than 2008 Chevrolet Blazer.
Because 2008 Chevrolet Blazer is four wheel drive (4WD), it will have significant more traction and grip than 1965 Pontiac Catalina. In wet, icy, snow, or gravel driving conditions, 2008 Chevrolet Blazer will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1965 Pontiac Catalina (625 Nm @ 3600 RPM) has 286 more torque (in Nm) than 2008 Chevrolet Blazer. (339 Nm @ 2800 RPM). This means 1965 Pontiac Catalina will have an easier job in driving up hills or pulling heavy equipment than 2008 Chevrolet Blazer.
Compare all specifications:
2008 Chevrolet Blazer | 1965 Pontiac Catalina | |
Make | Chevrolet | Pontiac |
Model | Blazer | Catalina |
Year Released | 2008 | 1965 |
Engine Position | Front | Front |
Engine Size | 4300 cc | 6891 cc |
Horse Power | 0 HP | 376 HP |
Torque | 339 Nm | 625 Nm |
Torque RPM | 2800 RPM | 3600 RPM |
Engine Bore Size | 101.6 mm | 103.9 mm |
Engine Stroke Size | 88.4 mm | 101.6 mm |
Engine Compression Ratio | 9.2:1 | 10.8:1 |
Drive Type | 4WD | Rear |
Transmission Type | Automatic | Automatic |
Number of Seats | 6 seats | 4 seats |
Vehicle Weight | 1876 kg | 1885 kg |
Vehicle Length | 5100 mm | 5450 mm |
Vehicle Height | 1500 mm | 1400 mm |
Wheelbase Size | 2720 mm | 3080 mm |