2008 Chevrolet Epica vs. 1963 Fiat 2300

To start off, 2008 Chevrolet Epica is newer by 45 year(s). Which means there will be less support and parts availability for 1963 Fiat 2300. In addition, the cost of maintenance, including insurance, on 1963 Fiat 2300 would be higher. At 2,492 cc (6 cylinders), 2008 Chevrolet Epica is equipped with a bigger engine. In terms of performance, 2008 Chevrolet Epica (154 HP @ 5800 RPM) has 50 more horse power than 1963 Fiat 2300. (104 HP @ 5300 RPM). In normal driving conditions, 2008 Chevrolet Epica should accelerate faster than 1963 Fiat 2300. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chevrolet Epica weights approximately 265 kg more than 1963 Fiat 2300. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1963 Fiat 2300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Fiat 2300. However, in wet, icy, snow, or gravel driving conditions, 2008 Chevrolet Epica, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chevrolet Epica (237 Nm @ 4000 RPM) has 70 more torque (in Nm) than 1963 Fiat 2300. (167 Nm @ 2800 RPM). This means 2008 Chevrolet Epica will have an easier job in driving up hills or pulling heavy equipment than 1963 Fiat 2300. 2008 Chevrolet Epica has automatic transmission and 1963 Fiat 2300 has manual transmission. 1963 Fiat 2300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chevrolet Epica will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 Chevrolet Epica 1963 Fiat 2300
Make Chevrolet Fiat
Model Epica 2300
Year Released 2008 1963
Body Type Sedan Coupe
Engine Position Front Front
Engine Size 2492 cc 2279 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 154 HP 104 HP
Engine RPM 5800 RPM 5300 RPM
Torque 237 Nm 167 Nm
Torque RPM 4000 RPM 2800 RPM
Engine Compression Ratio 9.8:1 8.8:1
Fuel Type Gasoline - Premium Gasoline
Drive Type Front Rear
Transmission Type Automatic Manual
Number of Seats 6 seats 4 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1575 kg 1310 kg
Vehicle Length 4810 mm 4630 mm
Vehicle Width 1820 mm 1640 mm
Vehicle Height 1460 mm 1370 mm
Wheelbase Size 2710 mm 2660 mm
Fuel Tank Capacity 63 L 70 L