2008 Chevrolet HHR vs. 2008 Ford Bantam
To start off, both 2008 Chevrolet HHR and 2008 Ford Bantam were released in the same year (2008). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 2,199 cc (4 cylinders), 2008 Chevrolet HHR is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chevrolet HHR weights approximately 1180 kg more than 2008 Ford Bantam.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chevrolet HHR (206 Nm @ 4200 RPM) has 96 more torque (in Nm) than 2008 Ford Bantam. (110 Nm @ 3000 RPM). This means 2008 Chevrolet HHR will have an easier job in driving up hills or pulling heavy equipment than 2008 Ford Bantam.
Compare all specifications:
2008 Chevrolet HHR | 2008 Ford Bantam | |
Make | Chevrolet | Ford |
Model | HHR | Bantam |
Year Released | 2008 | 2008 |
Body Type | Hatchback | Pickup |
Engine Position | Front | Front |
Engine Size | 2199 cc | 1297 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 148 HP | 0 HP |
Torque | 206 Nm | 110 Nm |
Torque RPM | 4200 RPM | 3000 RPM |
Engine Compression Ratio | 10.0:1 | 10.2:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 2200 kg | 1020 kg |
Vehicle Length | 4480 mm | 4280 mm |
Vehicle Width | 1760 mm | 1470 mm |
Vehicle Height | 1610 mm | 1640 mm |
Wheelbase Size | 2640 mm | 2670 mm |
Fuel Consumption Overall | 9.8 L/100km | 8.8 L/100km |
Fuel Tank Capacity | 61 L | 54 L |