2008 Chrysler 300 vs. 1972 Fiat 124

To start off, 2008 Chrysler 300 is newer by 36 year(s). Which means there will be less support and parts availability for 1972 Fiat 124. In addition, the cost of maintenance, including insurance, on 1972 Fiat 124 would be higher. At 6,059 cc (8 cylinders), 2008 Chrysler 300 is equipped with a bigger engine. In terms of performance, 2008 Chrysler 300 (425 HP @ 6200 RPM) has 309 more horse power than 1972 Fiat 124. (116 HP @ 6000 RPM). In normal driving conditions, 2008 Chrysler 300 should accelerate faster than 1972 Fiat 124. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler 300 weights approximately 849 kg more than 1972 Fiat 124. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1972 Fiat 124 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1972 Fiat 124. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler 300, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler 300 (570 Nm @ 4800 RPM) has 418 more torque (in Nm) than 1972 Fiat 124. (152 Nm @ 4000 RPM). This means 2008 Chrysler 300 will have an easier job in driving up hills or pulling heavy equipment than 1972 Fiat 124. 2008 Chrysler 300 has automatic transmission and 1972 Fiat 124 has manual transmission. 1972 Fiat 124 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler 300 will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 Chrysler 300 1972 Fiat 124
Make Chrysler Fiat
Model 300 124
Year Released 2008 1972
Engine Position Front Front
Engine Size 6059 cc 1747 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 425 HP 116 HP
Engine RPM 6200 RPM 6000 RPM
Torque 570 Nm 152 Nm
Torque RPM 4800 RPM 4000 RPM
Engine Bore Size 103 mm 84 mm
Engine Stroke Size 90.9 mm 79.2 mm
Engine Compression Ratio 10.3:1 9.8:1
Drive Type Front Rear
Transmission Type Automatic Manual
Number of Seats 5 seats 2 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1815 kg 966 kg
Vehicle Length 5010 mm 3980 mm
Vehicle Width 1890 mm 1620 mm
Vehicle Height 1480 mm 1260 mm
Wheelbase Size 3050 mm 2290 mm
Fuel Tank Capacity 72 L 45 L