2008 Chrysler 300 vs. 1980 Ferrari Pinin

To start off, 2008 Chrysler 300 is newer by 28 year(s). Which means there will be less support and parts availability for 1980 Ferrari Pinin. In addition, the cost of maintenance, including insurance, on 1980 Ferrari Pinin would be higher. At 4,942 cc (12 cylinders), 1980 Ferrari Pinin is equipped with a bigger engine. In terms of performance, 1980 Ferrari Pinin (355 HP @ 6200 RPM) has 109 more horse power than 2008 Chrysler 300. (246 HP @ 6400 RPM) In normal driving conditions, 1980 Ferrari Pinin should accelerate faster than 2008 Chrysler 300. With that said, vehicle weight also plays an important factor in acceleration. 1980 Ferrari Pinin weights approximately 15 kg more than 2008 Chrysler 300. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Ferrari Pinin (459 Nm @ 4600 RPM) has 119 more torque (in Nm) than 2008 Chrysler 300. (340 Nm @ 3800 RPM). This means 1980 Ferrari Pinin will have an easier job in driving up hills or pulling heavy equipment than 2008 Chrysler 300. 2008 Chrysler 300 has automatic transmission and 1980 Ferrari Pinin has manual transmission. 1980 Ferrari Pinin will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler 300 will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 Chrysler 300 1980 Ferrari Pinin
Make Chrysler Ferrari
Model 300 Pinin
Year Released 2008 1980
Engine Position Front Front
Engine Size 3517 cc 4942 cc
Engine Cylinders 6 cylinders 12 cylinders
Engine Type V V
Valves per Cylinder 4 valves 2 valves
Horse Power 246 HP 355 HP
Engine RPM 6400 RPM 6200 RPM
Torque 340 Nm 459 Nm
Torque RPM 3800 RPM 4600 RPM
Engine Bore Size 96 mm 82 mm
Engine Stroke Size 81 mm 78 mm
Engine Compression Ratio 10.0:1 8.8:1
Fuel Type Gasoline - Premium Gasoline
Drive Type Rear Rear
Transmission Type Automatic Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1815 kg 1830 kg
Vehicle Length 5020 mm 4830 mm
Wheelbase Size 3060 mm 2760 mm