2008 Chrysler Aspen vs. 1951 Mercedes-Benz 300S

To start off, 2008 Chrysler Aspen is newer by 57 year(s). Which means there will be less support and parts availability for 1951 Mercedes-Benz 300S. In addition, the cost of maintenance, including insurance, on 1951 Mercedes-Benz 300S would be higher. At 4,701 cc (8 cylinders), 2008 Chrysler Aspen is equipped with a bigger engine. In terms of performance, 2008 Chrysler Aspen (303 HP @ 5650 RPM) has 155 more horse power than 1951 Mercedes-Benz 300S. (148 HP @ 5000 RPM). In normal driving conditions, 2008 Chrysler Aspen should accelerate faster than 1951 Mercedes-Benz 300S. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Aspen weights approximately 75 kg more than 1951 Mercedes-Benz 300S. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2008 Chrysler Aspen is four wheel drive (4WD), it will have significant more traction and grip than 1951 Mercedes-Benz 300S. In wet, icy, snow, or gravel driving conditions, 2008 Chrysler Aspen will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Aspen (447 Nm @ 3950 RPM) has 217 more torque (in Nm) than 1951 Mercedes-Benz 300S. (230 Nm @ 3800 RPM). This means 2008 Chrysler Aspen will have an easier job in driving up hills or pulling heavy equipment than 1951 Mercedes-Benz 300S. 2008 Chrysler Aspen has automatic transmission and 1951 Mercedes-Benz 300S has manual transmission. 1951 Mercedes-Benz 300S will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Aspen will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 Chrysler Aspen 1951 Mercedes-Benz 300S
Make Chrysler Mercedes-Benz
Model Aspen 300S
Year Released 2008 1951
Body Type SUV Convertible
Engine Position Front Front
Engine Size 4701 cc 2996 cc
Engine Cylinders 8 cylinders 6 cylinders
Engine Type V in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 303 HP 148 HP
Engine RPM 5650 RPM 5000 RPM
Torque 447 Nm 230 Nm
Torque RPM 3950 RPM 3800 RPM
Engine Compression Ratio 9.8:1 7.8:1
Drive Type 4WD Rear
Transmission Type Automatic Manual
Number of Seats 8 seats 4 seats
Number of Doors 5 doors 2 doors
Vehicle Weight 1815 kg 1740 kg
Vehicle Length 5110 mm 4740 mm
Vehicle Width 1940 mm 1920 mm
Vehicle Height 1890 mm 1520 mm
Wheelbase Size 3030 mm 2910 mm
Fuel Tank Capacity 102 L 85 L