2008 Chrysler Aspen vs. 1956 Isuzu Minx
To start off, 2008 Chrysler Aspen is newer by 52 year(s). Which means there will be less support and parts availability for 1956 Isuzu Minx. In addition, the cost of maintenance, including insurance, on 1956 Isuzu Minx would be higher. At 4,701 cc (8 cylinders), 2008 Chrysler Aspen is equipped with a bigger engine. In terms of performance, 2008 Chrysler Aspen (303 HP @ 5650 RPM) has 258 more horse power than 1956 Isuzu Minx. (45 HP @ 4600 RPM). In normal driving conditions, 2008 Chrysler Aspen should accelerate faster than 1956 Isuzu Minx. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Aspen weights approximately 865 kg more than 1956 Isuzu Minx. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2008 Chrysler Aspen is four wheel drive (4WD), it will have significant more traction and grip than 1956 Isuzu Minx. In wet, icy, snow, or gravel driving conditions, 2008 Chrysler Aspen will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Aspen (447 Nm @ 3950 RPM) has 356 more torque (in Nm) than 1956 Isuzu Minx. (91 Nm @ 2400 RPM). This means 2008 Chrysler Aspen will have an easier job in driving up hills or pulling heavy equipment than 1956 Isuzu Minx. 2008 Chrysler Aspen has automatic transmission and 1956 Isuzu Minx has manual transmission. 1956 Isuzu Minx will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Aspen will be easier to drive especially in heavy traffic.
Compare all specifications:
2008 Chrysler Aspen | 1956 Isuzu Minx | |
Make | Chrysler | Isuzu |
Model | Aspen | Minx |
Year Released | 2008 | 1956 |
Engine Position | Front | Front |
Engine Size | 4701 cc | 1390 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 303 HP | 45 HP |
Engine RPM | 5650 RPM | 4600 RPM |
Torque | 447 Nm | 91 Nm |
Torque RPM | 3950 RPM | 2400 RPM |
Drive Type | 4WD | Rear |
Transmission Type | Automatic | Manual |
Vehicle Weight | 1815 kg | 950 kg |
Vehicle Length | 5110 mm | 4080 mm |
Vehicle Width | 1940 mm | 1560 mm |
Vehicle Height | 1890 mm | 1520 mm |
Wheelbase Size | 3030 mm | 2440 mm |