2008 Chrysler Aspen vs. 1963 Isuzu Bellett

To start off, 2008 Chrysler Aspen is newer by 45 year(s). Which means there will be less support and parts availability for 1963 Isuzu Bellett. In addition, the cost of maintenance, including insurance, on 1963 Isuzu Bellett would be higher. At 4,701 cc (8 cylinders), 2008 Chrysler Aspen is equipped with a bigger engine. In terms of performance, 2008 Chrysler Aspen (303 HP @ 5650 RPM) has 219 more horse power than 1963 Isuzu Bellett. (84 HP @ 5200 RPM). In normal driving conditions, 2008 Chrysler Aspen should accelerate faster than 1963 Isuzu Bellett. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Aspen weights approximately 895 kg more than 1963 Isuzu Bellett. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2008 Chrysler Aspen is four wheel drive (4WD), it will have significant more traction and grip than 1963 Isuzu Bellett. In wet, icy, snow, or gravel driving conditions, 2008 Chrysler Aspen will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Aspen (447 Nm @ 3950 RPM) has 324 more torque (in Nm) than 1963 Isuzu Bellett. (123 Nm @ 2600 RPM). This means 2008 Chrysler Aspen will have an easier job in driving up hills or pulling heavy equipment than 1963 Isuzu Bellett. 2008 Chrysler Aspen has automatic transmission and 1963 Isuzu Bellett has manual transmission. 1963 Isuzu Bellett will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Aspen will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 Chrysler Aspen 1963 Isuzu Bellett
Make Chrysler Isuzu
Model Aspen Bellett
Year Released 2008 1963
Engine Position Front Front
Engine Size 4701 cc 1584 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type V in-line
Horse Power 303 HP 84 HP
Engine RPM 5650 RPM 5200 RPM
Torque 447 Nm 123 Nm
Torque RPM 3950 RPM 2600 RPM
Engine Compression Ratio 9.8:1 8.7:1
Drive Type 4WD Rear
Transmission Type Automatic Manual
Number of Seats 8 seats 5 seats
Number of Doors 5 doors 4 doors
Vehicle Weight 1815 kg 920 kg
Vehicle Length 5110 mm 4000 mm
Vehicle Width 1940 mm 1500 mm
Vehicle Height 1890 mm 1400 mm
Wheelbase Size 3030 mm 2360 mm
Fuel Tank Capacity 102 L 40 L