2008 Chrysler Aspen vs. 2004 Ford Puma

To start off, 2008 Chrysler Aspen is newer by 4 year(s). Which means there will be less support and parts availability for 2004 Ford Puma. In addition, the cost of maintenance, including insurance, on 2004 Ford Puma would be higher. At 4,701 cc (8 cylinders), 2008 Chrysler Aspen is equipped with a bigger engine. In terms of performance, 2008 Chrysler Aspen (303 HP @ 5650 RPM) has 199 more horse power than 2004 Ford Puma. (104 HP @ 6250 RPM). In normal driving conditions, 2008 Chrysler Aspen should accelerate faster than 2004 Ford Puma. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Aspen weights approximately 780 kg more than 2004 Ford Puma. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2008 Chrysler Aspen is four wheel drive (4WD), it will have significant more traction and grip than 2004 Ford Puma. In wet, icy, snow, or gravel driving conditions, 2008 Chrysler Aspen will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Aspen (447 Nm @ 3950 RPM) has 298 more torque (in Nm) than 2004 Ford Puma. (149 Nm @ 4000 RPM). This means 2008 Chrysler Aspen will have an easier job in driving up hills or pulling heavy equipment than 2004 Ford Puma. 2008 Chrysler Aspen has automatic transmission and 2004 Ford Puma has manual transmission. 2004 Ford Puma will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Aspen will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 Chrysler Aspen 2004 Ford Puma
Make Chrysler Ford
Model Aspen Puma
Year Released 2008 2004
Body Type SUV Coupe
Engine Position Front Front
Engine Size 4701 cc 1678 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 303 HP 104 HP
Engine RPM 5650 RPM 6250 RPM
Torque 447 Nm 149 Nm
Torque RPM 3950 RPM 4000 RPM
Engine Compression Ratio 9.8:1 11.0:1
Drive Type 4WD Front
Transmission Type Automatic Manual
Number of Seats 8 seats 4 seats
Number of Doors 5 doors 2 doors
Vehicle Weight 1815 kg 1035 kg
Vehicle Length 5110 mm 3990 mm
Vehicle Width 1940 mm 1680 mm
Vehicle Height 1890 mm 1350 mm
Wheelbase Size 3030 mm 2450 mm
Fuel Tank Capacity 102 L 45 L