2008 Chrysler Aspen vs. 2008 Hummer H3
To start off, both 2008 Chrysler Aspen and 2008 Hummer H3 were released in the same year (2008). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 4,701 cc (8 cylinders), 2008 Chrysler Aspen is equipped with a bigger engine.
Both vehicles are four wheel drive (4WD) - it offers better handling, traction, and control in all driving conditions compared with front wheel drive or rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Aspen (447 Nm @ 3950 RPM) has 119 more torque (in Nm) than 2008 Hummer H3. (328 Nm @ 4600 RPM). This means 2008 Chrysler Aspen will have an easier job in driving up hills or pulling heavy equipment than 2008 Hummer H3. 2008 Chrysler Aspen has automatic transmission and 2008 Hummer H3 has manual transmission. 2008 Hummer H3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Aspen will be easier to drive especially in heavy traffic.
Compare all specifications:
2008 Chrysler Aspen | 2008 Hummer H3 | |
Make | Chrysler | Hummer |
Model | Aspen | H3 |
Year Released | 2008 | 2008 |
Body Type | SUV | SUV |
Engine Position | Front | Front |
Engine Size | 4701 cc | 3652 cc |
Engine Cylinders | 8 cylinders | 5 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 303 HP | 0 HP |
Torque | 447 Nm | 328 Nm |
Torque RPM | 3950 RPM | 4600 RPM |
Engine Compression Ratio | 9.8:1 | 10.0:1 |
Drive Type | 4WD | 4WD |
Transmission Type | Automatic | Manual |
Number of Seats | 8 seats | 5 seats |
Number of Doors | 5 doors | 5 doors |
Vehicle Length | 5110 mm | 5180 mm |
Vehicle Width | 1940 mm | 1900 mm |
Vehicle Height | 1890 mm | 1900 mm |
Wheelbase Size | 3030 mm | 2850 mm |
Fuel Tank Capacity | 102 L | 85 L |