2008 Chrysler Grand Voyager vs. 1972 Ford Torino
To start off, 2008 Chrysler Grand Voyager is newer by 36 year(s). Which means there will be less support and parts availability for 1972 Ford Torino. In addition, the cost of maintenance, including insurance, on 1972 Ford Torino would be higher. At 4,096 cc (6 cylinders), 1972 Ford Torino is equipped with a bigger engine. In terms of performance, 2008 Chrysler Grand Voyager (148 HP @ 3800 RPM) has 53 more horse power than 1972 Ford Torino. (95 HP @ 3600 RPM). In normal driving conditions, 2008 Chrysler Grand Voyager should accelerate faster than 1972 Ford Torino. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Grand Voyager weights approximately 411 kg more than 1972 Ford Torino. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1972 Ford Torino is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1972 Ford Torino. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler Grand Voyager, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Grand Voyager (360 Nm @ 2600 RPM) has 115 more torque (in Nm) than 1972 Ford Torino. (245 Nm @ 1600 RPM). This means 2008 Chrysler Grand Voyager will have an easier job in driving up hills or pulling heavy equipment than 1972 Ford Torino. 2008 Chrysler Grand Voyager has automatic transmission and 1972 Ford Torino has manual transmission. 1972 Ford Torino will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Grand Voyager will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2008 Chrysler Grand Voyager | 1972 Ford Torino | |
| Make | Chrysler | Ford |
| Model | Grand Voyager | Torino |
| Year Released | 2008 | 1972 |
| Engine Position | Front | Front |
| Engine Size | 2776 cc | 4096 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 148 HP | 95 HP |
| Engine RPM | 3800 RPM | 3600 RPM |
| Torque | 360 Nm | 245 Nm |
| Torque RPM | 2600 RPM | 1600 RPM |
| Engine Bore Size | 94 mm | 93.5 mm |
| Engine Stroke Size | 100 mm | 99.3 mm |
| Engine Compression Ratio | 17.5:1 | 8.0:1 |
| Drive Type | Front | Rear |
| Transmission Type | Automatic | Manual |
| Number of Seats | 7 seats | 5 seats |
| Number of Doors | 4 doors | 2 doors |
| Vehicle Weight | 2020 kg | 1609 kg |
| Vehicle Length | 4930 mm | 5180 mm |
| Vehicle Width | 2000 mm | 2020 mm |
| Vehicle Height | 1760 mm | 1320 mm |
| Wheelbase Size | 3040 mm | 2900 mm |
| Fuel Tank Capacity | 75 L | 87 L |
