2008 Chrysler Pacifica vs. 1953 Sunbeam Alpine
To start off, 2008 Chrysler Pacifica is newer by 55 year(s). Which means there will be less support and parts availability for 1953 Sunbeam Alpine. In addition, the cost of maintenance, including insurance, on 1953 Sunbeam Alpine would be higher. At 3,952 cc (6 cylinders), 2008 Chrysler Pacifica is equipped with a bigger engine. In terms of performance, 2008 Chrysler Pacifica (254 HP @ 6000 RPM) has 175 more horse power than 1953 Sunbeam Alpine. (79 HP @ 4200 RPM). In normal driving conditions, 2008 Chrysler Pacifica should accelerate faster than 1953 Sunbeam Alpine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Pacifica weights approximately 545 kg more than 1953 Sunbeam Alpine. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1953 Sunbeam Alpine is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1953 Sunbeam Alpine. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler Pacifica, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Pacifica (355 Nm) has 192 more torque (in Nm) than 1953 Sunbeam Alpine. (163 Nm). This means 2008 Chrysler Pacifica will have an easier job in driving up hills or pulling heavy equipment than 1953 Sunbeam Alpine. 2008 Chrysler Pacifica has automatic transmission and 1953 Sunbeam Alpine has manual transmission. 1953 Sunbeam Alpine will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Pacifica will be easier to drive especially in heavy traffic.
Compare all specifications:
2008 Chrysler Pacifica | 1953 Sunbeam Alpine | |
Make | Chrysler | Sunbeam |
Model | Pacifica | Alpine |
Year Released | 2008 | 1953 |
Engine Position | Front | Front |
Engine Size | 3952 cc | 2267 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 254 HP | 79 HP |
Engine RPM | 6000 RPM | 4200 RPM |
Torque | 355 Nm | 163 Nm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 6 seats | 4 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1815 kg | 1270 kg |
Vehicle Length | 5050 mm | 4280 mm |
Vehicle Width | 2020 mm | 1590 mm |
Vehicle Height | 1740 mm | 1480 mm |
Wheelbase Size | 2960 mm | 2490 mm |
Fuel Tank Capacity | 87 L | 45 L |