2008 Chrysler Pacifica vs. 1963 Lancia Appia
To start off, 2008 Chrysler Pacifica is newer by 45 year(s). Which means there will be less support and parts availability for 1963 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1963 Lancia Appia would be higher. At 3,952 cc (6 cylinders), 2008 Chrysler Pacifica is equipped with a bigger engine. In terms of performance, 2008 Chrysler Pacifica (254 HP @ 6000 RPM) has 202 more horse power than 1963 Lancia Appia. (52 HP @ 4900 RPM). In normal driving conditions, 2008 Chrysler Pacifica should accelerate faster than 1963 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Pacifica weights approximately 865 kg more than 1963 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1963 Lancia Appia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Lancia Appia. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler Pacifica, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Pacifica (355 Nm @ 4200 RPM) has 268 more torque (in Nm) than 1963 Lancia Appia. (87 Nm @ 3500 RPM). This means 2008 Chrysler Pacifica will have an easier job in driving up hills or pulling heavy equipment than 1963 Lancia Appia. 2008 Chrysler Pacifica has automatic transmission and 1963 Lancia Appia has manual transmission. 1963 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Pacifica will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2008 Chrysler Pacifica | 1963 Lancia Appia | |
| Make | Chrysler | Lancia |
| Model | Pacifica | Appia |
| Year Released | 2008 | 1963 |
| Engine Position | Front | Front |
| Engine Size | 3952 cc | 1090 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Valves per Cylinder | 4 valves | 2 valves |
| Horse Power | 254 HP | 52 HP |
| Engine RPM | 6000 RPM | 4900 RPM |
| Torque | 355 Nm | 87 Nm |
| Torque RPM | 4200 RPM | 3500 RPM |
| Engine Compression Ratio | 10.2:1 | 9.0:1 |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Front | Rear |
| Transmission Type | Automatic | Manual |
| Number of Seats | 6 seats | 5 seats |
| Number of Doors | 4 doors | 4 doors |
| Vehicle Weight | 1815 kg | 950 kg |
| Vehicle Length | 5050 mm | 4160 mm |
| Vehicle Width | 2020 mm | 1520 mm |
| Vehicle Height | 1740 mm | 1330 mm |
| Wheelbase Size | 2960 mm | 2520 mm |
| Fuel Consumption Overall | 13.8 L/100km | 10.3 L/100km |
| Fuel Tank Capacity | 87 L | 42 L |
