2008 Chrysler Pacifica vs. 2013 Mercedes-Benz CL

To start off, 2013 Mercedes-Benz CL is newer by 5 year(s). Which means there will be less support and parts availability for 2008 Chrysler Pacifica. In addition, the cost of maintenance, including insurance, on 2008 Chrysler Pacifica would be higher. At 6,000 cc (12 cylinders), 2013 Mercedes-Benz CL is equipped with a bigger engine. In terms of performance, 2013 Mercedes-Benz CL (613 HP @ 5000 RPM) has 360 more horse power than 2008 Chrysler Pacifica. (253 HP @ 6000 RPM) In normal driving conditions, 2013 Mercedes-Benz CL should accelerate faster than 2008 Chrysler Pacifica. With that said, vehicle weight also plays an important factor in acceleration. 2013 Mercedes-Benz CL weights approximately 372 kg more than 2008 Chrysler Pacifica. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2008 Chrysler Pacifica is four wheel drive (4WD), it will have significant more traction and grip than 2013 Mercedes-Benz CL. In wet, icy, snow, or gravel driving conditions, 2008 Chrysler Pacifica will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Mercedes-Benz CL (999 Nm @ 4300 RPM) has 644 more torque (in Nm) than 2008 Chrysler Pacifica. (355 Nm @ 4200 RPM). This means 2013 Mercedes-Benz CL will have an easier job in driving up hills or pulling heavy equipment than 2008 Chrysler Pacifica. 2008 Chrysler Pacifica has automatic transmission and 2013 Mercedes-Benz CL has manual transmission. 2013 Mercedes-Benz CL will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Pacifica will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 Chrysler Pacifica 2013 Mercedes-Benz CL
Make Chrysler Mercedes-Benz
Model Pacifica CL
Year Released 2008 2013
Body Type Crossover Coupe
Engine Position Front Rear
Engine Size 3950 cc 6000 cc
Engine Cylinders 6 cylinders 12 cylinders
Engine Type V in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 253 HP 613 HP
Engine RPM 6000 RPM 5000 RPM
Torque 355 Nm 999 Nm
Torque RPM 4200 RPM 4300 RPM
Engine Compression Ratio 10.2:1 9.0 : 1
Fuel Type Gasoline Gasoline - Premium
Drive Type 4WD Rear
Transmission Type Automatic Manual
Number of Seats 6 seats 4 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1873 kg 2245 kg
Vehicle Length 5050 mm 5106 mm
Vehicle Width 2020 mm 2139 mm
Vehicle Height 1740 mm 1428 mm
Wheelbase Size 2960 mm 2955 mm
Fuel Consumption 10.7 L/100km 10.9 L/100km
Fuel Consumption City 16.8 L/100km 17.4 L/100km