2008 Chrysler PT Cruiser vs. 1954 Sunbeam Alpine
To start off, 2008 Chrysler PT Cruiser is newer by 54 year(s). Which means there will be less support and parts availability for 1954 Sunbeam Alpine. In addition, the cost of maintenance, including insurance, on 1954 Sunbeam Alpine would be higher. At 2,429 cc (4 cylinders), 2008 Chrysler PT Cruiser is equipped with a bigger engine. In terms of performance, 2008 Chrysler PT Cruiser (150 HP @ 5200 RPM) has 71 more horse power than 1954 Sunbeam Alpine. (79 HP @ 4200 RPM). In normal driving conditions, 2008 Chrysler PT Cruiser should accelerate faster than 1954 Sunbeam Alpine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler PT Cruiser weights approximately 143 kg more than 1954 Sunbeam Alpine. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1954 Sunbeam Alpine is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1954 Sunbeam Alpine. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler PT Cruiser, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler PT Cruiser (214 Nm @ 4000 RPM) has 51 more torque (in Nm) than 1954 Sunbeam Alpine. (163 Nm @ 2400 RPM). This means 2008 Chrysler PT Cruiser will have an easier job in driving up hills or pulling heavy equipment than 1954 Sunbeam Alpine. 2008 Chrysler PT Cruiser has automatic transmission and 1954 Sunbeam Alpine has manual transmission. 1954 Sunbeam Alpine will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler PT Cruiser will be easier to drive especially in heavy traffic.
Compare all specifications:
2008 Chrysler PT Cruiser | 1954 Sunbeam Alpine | |
Make | Chrysler | Sunbeam |
Model | PT Cruiser | Alpine |
Year Released | 2008 | 1954 |
Engine Position | Front | Front |
Engine Size | 2429 cc | 2267 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 150 HP | 79 HP |
Engine RPM | 5200 RPM | 4200 RPM |
Torque | 214 Nm | 163 Nm |
Torque RPM | 4000 RPM | 2400 RPM |
Engine Bore Size | 87.5 mm | 81 mm |
Engine Stroke Size | 101 mm | 110 mm |
Engine Compression Ratio | 9.5:1 | 7.4:1 |
Fuel Type | Gasoline | Gasoline |
Top Speed | 178 km/hour | 153 km/hour |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 5 doors | 2 doors |
Vehicle Weight | 1443 kg | 1300 kg |
Vehicle Length | 4930 mm | 4280 mm |
Vehicle Height | 1490 mm | 1480 mm |
Wheelbase Size | 2620 mm | 2490 mm |
Fuel Tank Capacity | 57 L | 45 L |