2008 Chrysler PT Cruiser vs. 1958 Lancia Appia
To start off, 2008 Chrysler PT Cruiser is newer by 50 year(s). Which means there will be less support and parts availability for 1958 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1958 Lancia Appia would be higher. At 2,429 cc (4 cylinders), 2008 Chrysler PT Cruiser is equipped with a bigger engine. In terms of performance, 2008 Chrysler PT Cruiser (150 HP @ 5200 RPM) has 107 more horse power than 1958 Lancia Appia. (43 HP @ 4800 RPM). In normal driving conditions, 2008 Chrysler PT Cruiser should accelerate faster than 1958 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler PT Cruiser weights approximately 547 kg more than 1958 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1958 Lancia Appia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1958 Lancia Appia. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler PT Cruiser, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler PT Cruiser (214 Nm @ 4000 RPM) has 137 more torque (in Nm) than 1958 Lancia Appia. (77 Nm @ 3000 RPM). This means 2008 Chrysler PT Cruiser will have an easier job in driving up hills or pulling heavy equipment than 1958 Lancia Appia. 2008 Chrysler PT Cruiser has automatic transmission and 1958 Lancia Appia has manual transmission. 1958 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler PT Cruiser will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2008 Chrysler PT Cruiser | 1958 Lancia Appia | |
| Make | Chrysler | Lancia |
| Model | PT Cruiser | Appia |
| Year Released | 2008 | 1958 |
| Engine Position | Front | Front |
| Engine Size | 2429 cc | 1090 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 4 valves | 2 valves |
| Horse Power | 150 HP | 43 HP |
| Engine RPM | 5200 RPM | 4800 RPM |
| Torque | 214 Nm | 77 Nm |
| Torque RPM | 4000 RPM | 3000 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Front | Rear |
| Transmission Type | Automatic | Manual |
| Number of Seats | 4 seats | 5 seats |
| Vehicle Weight | 1411 kg | 864 kg |
| Vehicle Length | 5010 mm | 3980 mm |
| Vehicle Height | 1490 mm | 1410 mm |
| Wheelbase Size | 2620 mm | 2520 mm |
