2008 Chrysler PT Cruiser vs. 1963 Isuzu Bellett
To start off, 2008 Chrysler PT Cruiser is newer by 45 year(s). Which means there will be less support and parts availability for 1963 Isuzu Bellett. In addition, the cost of maintenance, including insurance, on 1963 Isuzu Bellett would be higher. At 2,429 cc (4 cylinders), 2008 Chrysler PT Cruiser is equipped with a bigger engine. In terms of performance, 2008 Chrysler PT Cruiser (150 HP @ 5200 RPM) has 61 more horse power than 1963 Isuzu Bellett. (89 HP @ 5400 RPM). In normal driving conditions, 2008 Chrysler PT Cruiser should accelerate faster than 1963 Isuzu Bellett. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler PT Cruiser weights approximately 472 kg more than 1963 Isuzu Bellett. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1963 Isuzu Bellett is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Isuzu Bellett. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler PT Cruiser, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler PT Cruiser (214 Nm @ 4000 RPM) has 86 more torque (in Nm) than 1963 Isuzu Bellett. (128 Nm @ 4200 RPM). This means 2008 Chrysler PT Cruiser will have an easier job in driving up hills or pulling heavy equipment than 1963 Isuzu Bellett. 2008 Chrysler PT Cruiser has automatic transmission and 1963 Isuzu Bellett has manual transmission. 1963 Isuzu Bellett will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler PT Cruiser will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2008 Chrysler PT Cruiser | 1963 Isuzu Bellett | |
| Make | Chrysler | Isuzu |
| Model | PT Cruiser | Bellett |
| Year Released | 2008 | 1963 |
| Engine Position | Front | Front |
| Engine Size | 2429 cc | 1583 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 150 HP | 89 HP |
| Engine RPM | 5200 RPM | 5400 RPM |
| Torque | 214 Nm | 128 Nm |
| Torque RPM | 4000 RPM | 4200 RPM |
| Engine Bore Size | 87.5 mm | 82 mm |
| Engine Stroke Size | 101 mm | 75 mm |
| Engine Compression Ratio | 9.5:1 | 9.3:1 |
| Top Speed | 240 km/hour | 161 km/hour |
| Drive Type | Front | Rear |
| Transmission Type | Automatic | Manual |
| Number of Seats | 4 seats | 4 seats |
| Number of Doors | 2 doors | 2 doors |
| Vehicle Weight | 1411 kg | 939 kg |
| Vehicle Length | 5010 mm | 4010 mm |
| Vehicle Height | 1490 mm | 1350 mm |
| Wheelbase Size | 2620 mm | 2360 mm |
| Fuel Tank Capacity | 57 L | 40 L |
