2008 Chrysler PT Cruiser vs. 1963 Lancia Appia
To start off, 2008 Chrysler PT Cruiser is newer by 45 year(s). Which means there will be less support and parts availability for 1963 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1963 Lancia Appia would be higher. At 2,429 cc (4 cylinders), 2008 Chrysler PT Cruiser is equipped with a bigger engine. In terms of performance, 2008 Chrysler PT Cruiser (180 HP) has 133 more horse power than 1963 Lancia Appia. (47 HP). In normal driving conditions, 2008 Chrysler PT Cruiser should accelerate faster than 1963 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler PT Cruiser weights approximately 1059 kg more than 1963 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1963 Lancia Appia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Lancia Appia. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler PT Cruiser, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler PT Cruiser (285 Nm @ 2800 RPM) has 208 more torque (in Nm) than 1963 Lancia Appia. (77 Nm @ 3000 RPM). This means 2008 Chrysler PT Cruiser will have an easier job in driving up hills or pulling heavy equipment than 1963 Lancia Appia. 2008 Chrysler PT Cruiser has automatic transmission and 1963 Lancia Appia has manual transmission. 1963 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler PT Cruiser will be easier to drive especially in heavy traffic.
Compare all specifications:
2008 Chrysler PT Cruiser | 1963 Lancia Appia | |
Make | Chrysler | Lancia |
Model | PT Cruiser | Appia |
Year Released | 2008 | 1963 |
Engine Position | Front | Front |
Engine Size | 2429 cc | 1090 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 180 HP | 47 HP |
Torque | 285 Nm | 77 Nm |
Torque RPM | 2800 RPM | 3000 RPM |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 5 doors | 2 doors |
Vehicle Weight | 1959 kg | 900 kg |
Vehicle Length | 4300 mm | 4020 mm |
Vehicle Width | 1710 mm | 1490 mm |
Vehicle Height | 1610 mm | 1410 mm |
Wheelbase Size | 2620 mm | 2520 mm |
Fuel Consumption Overall | 11.2 L/100km | 10.1 L/100km |
Fuel Tank Capacity | 57 L | 48 L |