2008 Chrysler PT Cruiser vs. 1990 Ferrari 412 GT
To start off, 2008 Chrysler PT Cruiser is newer by 18 year(s). Which means there will be less support and parts availability for 1990 Ferrari 412 GT. In addition, the cost of maintenance, including insurance, on 1990 Ferrari 412 GT would be higher. At 4,941 cc (12 cylinders), 1990 Ferrari 412 GT is equipped with a bigger engine. In terms of performance, 1990 Ferrari 412 GT (340 HP @ 6000 RPM) has 190 more horse power than 2008 Chrysler PT Cruiser. (150 HP @ 5200 RPM) In normal driving conditions, 1990 Ferrari 412 GT should accelerate faster than 2008 Chrysler PT Cruiser. With that said, vehicle weight also plays an important factor in acceleration. 1990 Ferrari 412 GT weights approximately 442 kg more than 2008 Chrysler PT Cruiser. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1990 Ferrari 412 GT is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1990 Ferrari 412 GT. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler PT Cruiser, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1990 Ferrari 412 GT (451 Nm @ 4200 RPM) has 237 more torque (in Nm) than 2008 Chrysler PT Cruiser. (214 Nm @ 4000 RPM). This means 1990 Ferrari 412 GT will have an easier job in driving up hills or pulling heavy equipment than 2008 Chrysler PT Cruiser. 2008 Chrysler PT Cruiser has automatic transmission and 1990 Ferrari 412 GT has manual transmission. 1990 Ferrari 412 GT will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler PT Cruiser will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2008 Chrysler PT Cruiser | 1990 Ferrari 412 GT | |
| Make | Chrysler | Ferrari |
| Model | PT Cruiser | 412 GT |
| Year Released | 2008 | 1990 |
| Body Type | Hatchback | Coupe |
| Engine Position | Front | Front |
| Engine Size | 2429 cc | 4941 cc |
| Engine Cylinders | 4 cylinders | 12 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 4 valves | 2 valves |
| Horse Power | 150 HP | 340 HP |
| Engine RPM | 5200 RPM | 6000 RPM |
| Torque | 214 Nm | 451 Nm |
| Torque RPM | 4000 RPM | 4200 RPM |
| Engine Bore Size | 87.5 mm | 82 mm |
| Engine Stroke Size | 101 mm | 78 mm |
| Engine Compression Ratio | 9.5:1 | 9.6:1 |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Front | Rear |
| Transmission Type | Automatic | Manual |
| Number of Seats | 5 seats | 4 seats |
| Number of Doors | 5 doors | 2 doors |
| Vehicle Weight | 1443 kg | 1885 kg |
| Vehicle Length | 4930 mm | 4820 mm |
| Vehicle Height | 1490 mm | 1320 mm |
| Wheelbase Size | 2620 mm | 2710 mm |
| Fuel Tank Capacity | 57 L | 120 L |
