2008 Chrysler PT Cruiser vs. 2010 Hyundai Santa Fe
To start off, 2010 Hyundai Santa Fe is newer by 2 year(s). Which means there will be less support and parts availability for 2008 Chrysler PT Cruiser. In addition, the cost of maintenance, including insurance, on 2008 Chrysler PT Cruiser would be higher. At 2,429 cc (4 cylinders), 2008 Chrysler PT Cruiser is equipped with a bigger engine. In terms of performance, 2010 Hyundai Santa Fe (192 HP @ 3800 RPM) has 42 more horse power than 2008 Chrysler PT Cruiser. (150 HP @ 5200 RPM) In normal driving conditions, 2010 Hyundai Santa Fe should accelerate faster than 2008 Chrysler PT Cruiser. With that said, vehicle weight also plays an important factor in acceleration. 2010 Hyundai Santa Fe weights approximately 518 kg more than 2008 Chrysler PT Cruiser. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 Hyundai Santa Fe is four wheel drive (4WD), it will have significant more traction and grip than 2008 Chrysler PT Cruiser. In wet, icy, snow, or gravel driving conditions, 2010 Hyundai Santa Fe will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Hyundai Santa Fe (436 Nm @ 1800 RPM) has 222 more torque (in Nm) than 2008 Chrysler PT Cruiser. (214 Nm @ 4000 RPM). This means 2010 Hyundai Santa Fe will have an easier job in driving up hills or pulling heavy equipment than 2008 Chrysler PT Cruiser. 2008 Chrysler PT Cruiser has automatic transmission and 2010 Hyundai Santa Fe has manual transmission. 2010 Hyundai Santa Fe will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler PT Cruiser will be easier to drive especially in heavy traffic.
Compare all specifications:
2008 Chrysler PT Cruiser | 2010 Hyundai Santa Fe | |
Make | Chrysler | Hyundai |
Model | PT Cruiser | Santa Fe |
Year Released | 2008 | 2010 |
Body Type | Hatchback | SUV |
Engine Position | Front | Front |
Engine Size | 2429 cc | 2199 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 150 HP | 192 HP |
Engine RPM | 5200 RPM | 3800 RPM |
Torque | 214 Nm | 436 Nm |
Torque RPM | 4000 RPM | 1800 RPM |
Engine Bore Size | 87.5 mm | 8.4 mm |
Engine Stroke Size | 101 mm | 96 mm |
Engine Compression Ratio | 9.5:1 | 16:01 |
Fuel Type | Gasoline | Diesel |
Acceleration 0-100mph | 11.6 seconds | 9.8 seconds |
Drive Type | Front | 4WD |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 7 seats |
Number of Doors | 5 doors | 5 doors |
Vehicle Weight | 1443 kg | 1961 kg |
Vehicle Length | 4930 mm | 4685 mm |
Vehicle Height | 1490 mm | 1725 mm |
Wheelbase Size | 2620 mm | 2700 mm |
Fuel Consumption Overall | 12.3 L/100km | 6.8 L/100km |
Fuel Tank Capacity | 57 L | 68 L |