2008 Chrysler PT Cruiser vs. 2012 SsangYong Stavic
To start off, 2012 SsangYong Stavic is newer by 4 year(s). Which means there will be less support and parts availability for 2008 Chrysler PT Cruiser. In addition, the cost of maintenance, including insurance, on 2008 Chrysler PT Cruiser would be higher. At 2,696 cc (5 cylinders), 2012 SsangYong Stavic is equipped with a bigger engine. In terms of performance, 2012 SsangYong Stavic (163 HP @ 4000 RPM) has 13 more horse power than 2008 Chrysler PT Cruiser. (150 HP @ 5200 RPM) In normal driving conditions, 2012 SsangYong Stavic should accelerate faster than 2008 Chrysler PT Cruiser. With that said, vehicle weight also plays an important factor in acceleration. 2012 SsangYong Stavic weights approximately 512 kg more than 2008 Chrysler PT Cruiser. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2012 SsangYong Stavic is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2012 SsangYong Stavic. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler PT Cruiser, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 SsangYong Stavic (342 Nm @ 2400 RPM) has 127 more torque (in Nm) than 2008 Chrysler PT Cruiser. (215 Nm @ 4000 RPM). This means 2012 SsangYong Stavic will have an easier job in driving up hills or pulling heavy equipment than 2008 Chrysler PT Cruiser. 2012 SsangYong Stavic has automatic transmission and 2008 Chrysler PT Cruiser has manual transmission. 2008 Chrysler PT Cruiser will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 SsangYong Stavic will be easier to drive especially in heavy traffic.
Compare all specifications:
2008 Chrysler PT Cruiser | 2012 SsangYong Stavic | |
Make | Chrysler | SsangYong |
Model | PT Cruiser | Stavic |
Year Released | 2008 | 2012 |
Body Type | Hatchback | Minivan |
Engine Position | Front | Front |
Engine Size | 2429 cc | 2696 cc |
Engine Cylinders | 4 cylinders | 5 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 150 HP | 163 HP |
Engine RPM | 5200 RPM | 4000 RPM |
Torque | 215 Nm | 342 Nm |
Torque RPM | 4000 RPM | 2400 RPM |
Engine Bore Size | 87.5 mm | 86.2 mm |
Engine Stroke Size | 101 mm | 92.4 mm |
Fuel Type | Gasoline | Diesel |
Top Speed | 183 km/hour | 174 km/hour |
Acceleration 0-100mph | 10.8 seconds | 13.8 seconds |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 7 seats |
Number of Doors | 5 doors | 5 doors |
Vehicle Weight | 1411 kg | 1923 kg |
Vehicle Length | 5010 mm | 5130 mm |
Vehicle Height | 1490 mm | 1920 mm |
Wheelbase Size | 2620 mm | 3010 mm |
Fuel Consumption Overall | 11.8 L/100km | 9.9 L/100km |
Fuel Tank Capacity | 57 L | 80 L |