2008 Chrysler Sebring vs. 1956 Mercedes-Benz 220
To start off, 2008 Chrysler Sebring is newer by 52 year(s). Which means there will be less support and parts availability for 1956 Mercedes-Benz 220. In addition, the cost of maintenance, including insurance, on 1956 Mercedes-Benz 220 would be higher. At 2,360 cc (4 cylinders), 2008 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2008 Chrysler Sebring (173 HP @ 6000 RPM) has 61 more horse power than 1956 Mercedes-Benz 220. (112 HP @ 5000 RPM). In normal driving conditions, 2008 Chrysler Sebring should accelerate faster than 1956 Mercedes-Benz 220. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Sebring weights approximately 518 kg more than 1956 Mercedes-Benz 220. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 Mercedes-Benz 220 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Mercedes-Benz 220. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Sebring (225 Nm @ 4400 RPM) has 58 more torque (in Nm) than 1956 Mercedes-Benz 220. (167 Nm @ 3800 RPM). This means 2008 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1956 Mercedes-Benz 220. 2008 Chrysler Sebring has automatic transmission and 1956 Mercedes-Benz 220 has manual transmission. 1956 Mercedes-Benz 220 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
2008 Chrysler Sebring | 1956 Mercedes-Benz 220 | |
Make | Chrysler | Mercedes-Benz |
Model | Sebring | 220 |
Year Released | 2008 | 1956 |
Engine Position | Front | Front |
Engine Size | 2360 cc | 2193 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 173 HP | 112 HP |
Engine RPM | 6000 RPM | 5000 RPM |
Torque | 225 Nm | 167 Nm |
Torque RPM | 4400 RPM | 3800 RPM |
Engine Compression Ratio | 10.5:1 | 7.6:1 |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1818 kg | 1300 kg |
Vehicle Length | 4850 mm | 4720 mm |
Vehicle Width | 1810 mm | 1750 mm |
Vehicle Height | 1510 mm | 1570 mm |
Wheelbase Size | 2770 mm | 2830 mm |
Fuel Tank Capacity | 64 L | 85 L |