2008 Chrysler Sebring vs. 1960 Lancia Appia
To start off, 2008 Chrysler Sebring is newer by 48 year(s). Which means there will be less support and parts availability for 1960 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1960 Lancia Appia would be higher. At 2,736 cc (6 cylinders), 2008 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2008 Chrysler Sebring (189 HP @ 6400 RPM) has 134 more horse power than 1960 Lancia Appia. (55 HP @ 4900 RPM). In normal driving conditions, 2008 Chrysler Sebring should accelerate faster than 1960 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Sebring weights approximately 1010 kg more than 1960 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1960 Lancia Appia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1960 Lancia Appia. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Sebring (259 Nm @ 4000 RPM) has 171 more torque (in Nm) than 1960 Lancia Appia. (88 Nm @ 3500 RPM). This means 2008 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1960 Lancia Appia. 2008 Chrysler Sebring has automatic transmission and 1960 Lancia Appia has manual transmission. 1960 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
2008 Chrysler Sebring | 1960 Lancia Appia | |
Make | Chrysler | Lancia |
Model | Sebring | Appia |
Year Released | 2008 | 1960 |
Engine Position | Front | Front |
Engine Size | 2736 cc | 1090 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 189 HP | 55 HP |
Engine RPM | 6400 RPM | 4900 RPM |
Torque | 259 Nm | 88 Nm |
Torque RPM | 4000 RPM | 3500 RPM |
Fuel Type | Gasoline - Premium | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 1815 kg | 805 kg |
Vehicle Length | 4930 mm | 4200 mm |
Vehicle Width | 1820 mm | 1430 mm |
Vehicle Height | 1490 mm | 1250 mm |
Wheelbase Size | 2770 mm | 2520 mm |
Fuel Consumption Overall | 11.2 L/100km | 10.1 L/100km |
Fuel Tank Capacity | 64 L | 37 L |