2008 Chrysler Sebring vs. 1962 Lancia Appia
To start off, 2008 Chrysler Sebring is newer by 46 year(s). Which means there will be less support and parts availability for 1962 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1962 Lancia Appia would be higher. At 1,968 cc (4 cylinders), 2008 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2008 Chrysler Sebring (138 HP @ 4000 RPM) has 91 more horse power than 1962 Lancia Appia. (47 HP @ 4800 RPM). In normal driving conditions, 2008 Chrysler Sebring should accelerate faster than 1962 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Sebring weights approximately 950 kg more than 1962 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1962 Lancia Appia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Lancia Appia. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Sebring (311 Nm @ 1800 RPM) has 234 more torque (in Nm) than 1962 Lancia Appia. (77 Nm @ 3000 RPM). This means 2008 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1962 Lancia Appia. 2008 Chrysler Sebring has automatic transmission and 1962 Lancia Appia has manual transmission. 1962 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
2008 Chrysler Sebring | 1962 Lancia Appia | |
Make | Chrysler | Lancia |
Model | Sebring | Appia |
Year Released | 2008 | 1962 |
Engine Position | Front | Front |
Engine Size | 1968 cc | 1089 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 138 HP | 47 HP |
Engine RPM | 4000 RPM | 4800 RPM |
Torque | 311 Nm | 77 Nm |
Torque RPM | 1800 RPM | 3000 RPM |
Engine Bore Size | 81 mm | 68 mm |
Engine Stroke Size | 95.5 mm | 75 mm |
Fuel Type | Diesel | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 4 seats | 5 seats |
Vehicle Weight | 1850 kg | 900 kg |
Vehicle Length | 4940 mm | 4020 mm |
Vehicle Width | 1850 mm | 1490 mm |
Vehicle Height | 1490 mm | 1410 mm |
Wheelbase Size | 2770 mm | 2520 mm |
Fuel Consumption Overall | 6.8 L/100km | 10.1 L/100km |
Fuel Tank Capacity | 64 L | 37 L |