2008 Chrysler Sebring vs. 1965 Porsche 912

To start off, 2008 Chrysler Sebring is newer by 43 year(s). Which means there will be less support and parts availability for 1965 Porsche 912. In addition, the cost of maintenance, including insurance, on 1965 Porsche 912 would be higher. At 2,360 cc (4 cylinders), 2008 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2008 Chrysler Sebring (173 HP @ 6000 RPM) has 84 more horse power than 1965 Porsche 912. (89 HP @ 5800 RPM). In normal driving conditions, 2008 Chrysler Sebring should accelerate faster than 1965 Porsche 912. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Sebring weights approximately 848 kg more than 1965 Porsche 912. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1965 Porsche 912 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1965 Porsche 912. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Sebring (225 Nm @ 4400 RPM) has 92 more torque (in Nm) than 1965 Porsche 912. (133 Nm @ 3500 RPM). This means 2008 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1965 Porsche 912. 2008 Chrysler Sebring has automatic transmission and 1965 Porsche 912 has manual transmission. 1965 Porsche 912 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Sebring will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 Chrysler Sebring 1965 Porsche 912
Make Chrysler Porsche
Model Sebring 912
Year Released 2008 1965
Body Type Coupe Coupe
Engine Position Front Rear
Engine Size 2360 cc 1580 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 173 HP 89 HP
Engine RPM 6000 RPM 5800 RPM
Torque 225 Nm 133 Nm
Torque RPM 4400 RPM 3500 RPM
Engine Compression Ratio 10.5:1 9.3:1
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Transmission Type Automatic Manual
Number of Seats 5 seats 4 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1818 kg 970 kg
Vehicle Length 4850 mm 4170 mm
Vehicle Width 1810 mm 1610 mm
Vehicle Height 1510 mm 1310 mm
Wheelbase Size 2770 mm 2220 mm
Fuel Tank Capacity 64 L 61 L