2008 Chrysler Sebring vs. 1969 Holden Belmont
To start off, 2008 Chrysler Sebring is newer by 39 year(s). Which means there will be less support and parts availability for 1969 Holden Belmont. In addition, the cost of maintenance, including insurance, on 1969 Holden Belmont would be higher. At 2,636 cc (6 cylinders), 1969 Holden Belmont is equipped with a bigger engine. In terms of performance, 2008 Chrysler Sebring (138 HP @ 4000 RPM) has 26 more horse power than 1969 Holden Belmont. (112 HP @ 4400 RPM). In normal driving conditions, 2008 Chrysler Sebring should accelerate faster than 1969 Holden Belmont. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Sebring weights approximately 575 kg more than 1969 Holden Belmont. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1969 Holden Belmont is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1969 Holden Belmont. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Sebring (311 Nm @ 1800 RPM) has 98 more torque (in Nm) than 1969 Holden Belmont. (213 Nm @ 2000 RPM). This means 2008 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1969 Holden Belmont. 2008 Chrysler Sebring has automatic transmission and 1969 Holden Belmont has manual transmission. 1969 Holden Belmont will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2008 Chrysler Sebring | 1969 Holden Belmont | |
| Make | Chrysler | Holden |
| Model | Sebring | Belmont |
| Year Released | 2008 | 1969 |
| Engine Position | Front | Front |
| Engine Size | 1968 cc | 2636 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 138 HP | 112 HP |
| Engine RPM | 4000 RPM | 4400 RPM |
| Torque | 311 Nm | 213 Nm |
| Torque RPM | 1800 RPM | 2000 RPM |
| Fuel Type | Diesel | Gasoline |
| Drive Type | Front | Rear |
| Transmission Type | Automatic | Manual |
| Vehicle Weight | 1850 kg | 1275 kg |
| Vehicle Length | 4940 mm | 4700 mm |
| Vehicle Width | 1850 mm | 1830 mm |
| Vehicle Height | 1490 mm | 1420 mm |
| Wheelbase Size | 2770 mm | 2830 mm |
